Date: Sat, 22 Mar 1997 18:16:52 -0800 From: Amancio Hasty <hasty@rah.star-gate.com> To: Steve Passe <smp@csn.net> Cc: multimedia@freebsd.org Subject: Re: First Cut at separating tuner and capture devices Message-ID: <199703230216.SAA01151@rah.star-gate.com> In-Reply-To: Your message of "Sat, 22 Mar 1997 18:56:47 MST." <199703230156.SAA15808@Ilsa.StevesCafe.com>
index | next in thread | previous in thread | raw e-mail
Your suggestion is a good one so just cut an paste them to tuner_ioctl.
This is a logical partition and not a physical partition which I did
with my patch;however I understand the need to make the change.
With respect to the matrox meteor we of course will break
compatibility where as with my suggested changes we maintain
full ioctl compatibility . Nevertheless, less go ahead an
proceed on this path since I think is the appropriate course.
So how does the hook works?
int
bktr_ioctl( dev_t dev, int cmd, caddr_t arg, int flag, struct proc *pr )
{
bktr_reg_t *bktr;
int unit;
int status;
int count;
int tmp_int;
volatile u_char *bt848, c_temp;
volatile u_short *bts_reg, s_temp;
volatile u_long *btl_reg;
unsigned int temp, temp1;
unsigned int error;
struct meteor_geomet *geo;
struct meteor_counts *cnt;
struct meteor_video *video;
vm_offset_t buf;
unit = UNIT(minor(dev));
if (unit >= NBKTR) /* unit out of range */
return(ENXIO);
-----
if (minor(dev) > 0 ) {
return tuner_ioctl(minor(dev), cmd, arg, flag, pr);
}
------
The minor device is greater than 0 so off it goes to the tuner section.
Your main device is still 0 , 1, 2, etc.. so the device which
the tuner code affects can be located.
Lets see in open you get a device handle 0xff. The first 4 bits denotes
the major device. The fifth bit flags that we are addressing
the tuner device.
Enjoy,
Amancio
>From The Desk Of Steve Passe :
> Hi,
>
> patches apply cleanly. first problem I see is that to be practical
> we will need to move all input control and color control into the tuner_ioctl
:
>
> case METEORSINPUT: /* set input device */
> case METEOR_INPUT_DEV0:
> case METEOR_INPUT_DEV1:
> case METEOR_INPUT_DEV2:
> case METEOR_INPUT_DEV_SVIDEO:
>
> case BT848_SHUE: /* set hue */
> case BT848_GHUE: /* get hue */
> case BT848_SBRIG: /* set brightness */
> case BT848_GBRIG: /* get brightness */
> case BT848_SCSAT: /* set chroma saturation */
> case BT848_GCSAT: /* get chroma saturation */
> case BT848_SVSAT: /* set chroma V saturation */
> case BT848_GVSAT: /* get chroma V saturation */
> case BT848_SUSAT: /* set chroma U saturation */
> case BT848_GUSAT: /* get chroma U saturation */
> case BT848_SCONT: /* set contrast */
> case BT848_GCONT: /* get contrast */
>
> ---
> can we do this, does it make any sense?
>
> where are the hooks to tuner_xxx in brooktree848.c? I don't see
> where anything gets steered to them via the minor number? what am I
> missing?
>
>
> --
> Steve Passe | powered by
> smp@csn.net | Symmetric MultiProcessor FreeBSD
>
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703230216.SAA01151>