Date: Wed, 23 Jul 1997 15:23:01 -0700 From: Dmitry Kohmanyuk <dk@genesyslab.com> To: freebsd-hardware@freebsd.org Subject: gus ISA pnp, 2.2-STABLE - doesn't work Message-ID: <19970723152301.07199@genesyslab.com>
next in thread | raw e-mail | index | archive | help
I have installed GUS PnP (ISA) in my workstation.
I am running 2.2-STABLE (make world past 2.2.2-RELEASE).
I cannot get neither playback nor recording to work.
dmesg:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2-STABLE #1: Fri Jul 18 02:35:25 PDT 1997
dk@dao.genesyslab.com:/usr/src/sys/compile/ZEN
CPU: Pentium (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 67108864 (65536K bytes)
avail memory = 62390272 (60928K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 1 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 10 on pci0:13
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "SEAGATE ST32155N 0532" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2049MB (4197405 512 byte sectors)
sd0(ahc0:0:0): with 4177 cyls, 8 heads, and an average 125 sectors/track
(ahc0:1:0): "SEAGATE ST15230N 0638" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4095MB (8386733 512 byte sectors)
sd1(ahc0:1:0): with 3992 cyls, 19 heads, and an average 110 sectors/track
(ahc0:5:0): "TOSHIBA CD-ROM XM-5401TA 3605" type 5 removable SCSI 2
cd0(ahc0:5:0): CD-ROM cd present [355160 x 2048 byte records]
(ahc0:6:0): "PLEXTOR CD-ROM PX-4XCS 1.01" type 5 removable SCSI 2
cd1(ahc0:6:0): CD-ROM cd present [201117 x 2048 byte records]
de0 <Digital 21140 Fast Ethernet> rev 18 int a irq 9 on pci0:14
de0: DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:30:93:a2
de0: enabling 10baseT port
vga0 <VGA-compatible display device> rev 0 int a irq 11 on pci0:15
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
bt0 not found at 0x330
npx0 on motherboard
npx0: INT 16 interface
sb0 not found at 0x220
gus0 at 0x220 irq 5 drq 1 on isa
gus0: <Gravis UltraSound 2.4 (256k)>
DEVFS: ready to run
IP packet filtering initialized, divert enabled, logging disabled
WARNING: / was not properly dismounted.
cd0(ahc0:5:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB sks:c0,7
cd0(ahc0:5:0): NOT READY asc:3a,0 Medium not present
isa_dmastart: channel 1 busy
Sound: DMA timed out - IRQ/DRQ config error?
the last 2 messages are when I type `cat /bin/sh > /dev/audio' and
`cat < /dev/audio', respectively.
I have 2 Mb installed in it (2 1M SIMMs, 60ns).
I have started DOS program from floppy disk and it shows me menu with
options to disable and enable, all is enabled except ATAPI interface.
Any thoughts?
Is there any GUS PnP support in 2.2 at all?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970723152301.07199>