Date: Sun, 21 Dec 1997 15:07:20 -0500 From: Randall Hopper <rhh@ct.picker.com> To: mcdougall@ameritech.net Cc: multimedia@freebsd.org Subject: Re: sb32 troubles Message-ID: <19971221150720.17419@ct.picker.com> In-Reply-To: <349C9604.9F69715B@ameritech.net>; from Adam McDougall on Sat, Dec 20, 1997 at 11:07:32PM -0500 References: <349C9604.9F69715B@ameritech.net>
index | next in thread | previous in thread | raw e-mail
Adam McDougall: |Hello, I am hoping one (or more :) or the sound geniouses could help me Whoops. I don't qualify, but I'll try anyway. :-) |with a problem I am having with my sb32 card in -current. Almost all |parts of it are detected, but not sbxvi0(sp), thus I get no digital Without sbxvi0, you should get 8-bit audio only I believe (sb0 takes care of it). Try catting a .au file to /dev/audio. |audio. And I am unsure if the midi component is working since playmidi |doesnt want to compile for me. I am pretty sure it is not the card's Once you get past the PnP issues, pull the AWE driver, and the "awesfx" and "awemidi" ports from http://multiverse.com/~rhh/awedrv. MIDIs will be _loads_ better than anything SB FM or OPL can get you. Let me know if you need any help. |fault since it works fine in other machines under NT and 2.2.5-release, |and I have tried other same model cards in my -current machine, but |still no luck. heres the lines from my kernel conf file: | |controller snd0 |device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr |options SBC_IRQ=5 |device sbxvi0 at isa? drq 5 |device sbmidi0 at isa? port 0x300 |device opl0 at isa? port 0x388 conflicts |controller pnp0 |(adding the pnp0 didnt help but made the kernel realize a pnp card was |present) See http://multiverse.com/~rhh/awedrv/awepnp-freebsd.txt for Conrad's tips on getting PnP set up for AWE32/64 & SB32 cards. The "0x300" should be "0x330" above. Also, I'd suggest commenting out the SBC_IRQ line. I'm a little puzzled at the conflicts on the OPL line as well. Barring PnP, looks like we have the same H/W config. So try this (my config): controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 # Yamaha OPL-2/OPL-3 FM - for SB, SB Pro, SB16, PAS device opl0 at isa? port 0x388 device awe0 at isa? port 0x620 Of course, add in the necessary PnP lines for your card. Randallhome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19971221150720.17419>