Date: Fri, 13 Feb 1998 00:10:44 +0100 (MET) From: Axel Thimm <thimm@physik.fu-berlin.de> To: current@FreeBSD.ORG Cc: Axel.Thimm@physik.fu-berlin.de (Axel Thimm) Subject: getcwd, fork & vfork Message-ID: <199802122310.AAA12094@oberon.physik.fu-berlin.de>
next in thread | raw e-mail | index | archive | help
Hello,
trying to configure the latest (prerelease) tetex as a normal user under my
account, I get a sudden reboot unfortunately leaving no traces behind. It
doesn't matter, if X is running, and I updated /etc and /dev accordingly.
Checking the configure output by eye I see that it stops at the following line
"checking if getcwd uses fork or vfork",
so it could be that the problem lies somewhere there.
I can provide more information, if neccessary. (Just tell me what you would
like to know.)
Regards, Axel.
System:
FreeBSD 3.0-CURRENT #0: Thu Feb 12 19:42:53 CET 1998
egcs 1.0.1 as a port, and detected by configure
Pentium, 64MB
dmesg:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Thu Feb 12 19:42:53 CET 1998
root@rige.physik.fu-berlin.de:/usr/src/sys/compile/RIGE
CPU: Pentium (166.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62857216 (61384K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 10 on pci0.10.0
vx0: <3COM 3C900 Etherlink XL PCI> rev 0x00 int a irq 11 on pci0.11.0
utp/aui/bnc[*bnc*] address 00:60:08:8f:e0:9d
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU MPA3026ATU>
wd0: 2503MB (5126688 sectors), 5086 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <Conner Peripherals 1275MB - CFS1275A>
wd2: 1219MB (2496816 sectors), 2477 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
--
Axel Thimm Axel.Thimm@physik.fu-berlin.de Axel.Thimm@ifh.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199802122310.AAA12094>