Date: Tue, 3 Mar 1998 08:04:39 -0500 (EST) From: Gang-Ryung Uh <uh@NU.CS.FSU.EDU> To: questions@FreeBSD.ORG Subject: 2.2.5 Installation Message-ID: <199803031304.IAA12487@xi.cs.fsu.edu>
next in thread | raw e-mail | index | archive | help
Hello,
Recently, I got a PC, MICRON millennia XKU. The following is the more
detailed information about the PC:
Processor Type: Pentium II
Processor Speed: 266 MHz
Total Memory 64 MB
DISK 6449 MB
CDROM -- SONY CD-ROM CDU771
Disk Drives
-- Generic IDE DISK TYPE 40
-- Generic NEC FLOPPY DISK
-- IOMEGA ZIP 100
DISPLAY Adapters
-- Diamond Viper V330
Floppy Disk Controller
-- Standard Floppy Disk Controller
Hard Disk Controllers
-- Interl 82371AB PCI Bus Master IDE Controller
-- Primary IDE controller (dual fifo)
-- Secondary IDE controller (dual info)
Keyboard
-- PC/AT Enhanced Keyboard (101/102 Key)
Modem
-- Sportster 56000 Fax Internal PNP
Mouse
-- Microsoft PS2 Mouse with Wheel
Network Adapters
-- 3Com Fast EtherLink XL 10/100Mb TX Ethernet Adapter
Ports
-- Communications Port (COM1)
-- Printer Port (LPT1)
Sound, video and game controllers
-- YAMAHA OPL3-SAx GamePort
-- YAMAHA OPL3-SAx Sound System
...
USB
-- Interl 82371AB PCI to USB Universal Host Controller
-- USB Root Hub
When I boot the system with FreeBSD 2.2.5 boot floppy, the installation
process hang after displaying messages as shown before. Even though I
resolved (?) the conflicts during the installation, I could not make
BSD installed on the PC that I can access. Any help or advise will
be appreciated. Thanks in advance.
Regards,
Gang-Ryung Uh
------------------- installation messages ---------
avail memory = 61071350 (59640K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0
chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1
chip2 <generic PCI bridge (vendor=8086 device=7110 subclass=1)> rev 1 on pci0:7:
0
pci0:7:1: Intel Corporation, device=0x7111, class=storage (ide) [no driver assig
ned]
pci0:7:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 int d irq
11 [no driver assigned]
chip3 <generic PCI bridge (vendor=8086 device=7113 subclass=128)> rev 1 on pci0:
7:3
vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 10 on pci0:13
HANG!!!!!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803031304.IAA12487>