Date: Mon, 17 Aug 1998 22:00:46 +0200 From: Philippe Regnauld <regnauld@deepo.prosa.dk> To: freebsd-smp@FreeBSD.ORG Subject: PR440fx (Toshiba) + SMP ? Message-ID: <19980817220046.44173@deepo.prosa.dk>
index | next in thread | raw e-mail
I've just replaced my GA-586DX with a PR440fx board with 2 P6-166,
CSS audio and Intel 100Mb fxp.
(the BIOS displays Toshiba at boot).
- I've upgraded to the latest BIOS
- I've recompiled my kernel with I686 (-current from last night)
But FreeBSD insists on seeing only one CPU -- I've even tried hardwiring
with NCPU=2, to no avail. I've also tried playing with the BIOS
SMP settings (1.1 or 1.4) -- no luck...
dmesg + mptable follows
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Mon Aug 17 22:15:45 MET DST 1998
regnauld@tetard.glou.eu.org:/usr/src/sys/compile/TETARD.smp
Timecounter "i8254" frequency 1193182 Hz cost 3588 ns
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 62853120 (61380K bytes)
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 18 on pci0.6.
0
fxp0: Ethernet address 00:a0:c9:49:58:d9
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 17 on pci0.9.
0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
scbus0 at ahc0 bus 0
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <IBM DCAS-34330W S65A> type 0 fixed SCSI 2
sd0: Direct-Access 4134MB (8467200 512 byte sectors)
sd0: with 8205 cyls, 6 heads, and an average 171 sectors/track
vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 18 on pci0.17.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <12 virtual consoles, flags=0x0>
ed0 at 0x340-0x35f irq 9 on isa
ed0: address 00:20:a9:00:4b:bd, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
psm0 not found at 0x60
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
css0 at 0x534 irq 5 drq 1 flags 0x100 on isa
snd0: <CS4232 (CS4236)>
mpu0 not found at 0x330
APIC_IO: routing 8254 via 8259 on pin 0
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7ed0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x33
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f7ee0
signature: 'PCMP'
base table length: 216
version: 1.4
checksum: 0x62
OEM ID: 'INTEL '
Product ID: 'PR440FX '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 20
local APIC address: 0xfec08000
extended table length: 120
extended table checksum: 15
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 1 9 0xfbff
--
Bus: Bus ID Type
0 PCI
18 ISA
--
I/O APICs: APIC ID Version State Address
13 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 18 0 13 0
INT active-hi edge 18 1 13 1
INT active-hi edge 18 3 13 3
INT active-hi edge 18 4 13 4
INT active-hi edge 18 5 13 5
INT active-hi edge 18 6 13 6
INT active-hi edge 18 7 13 7
INT active-hi edge 18 8 13 8
INT active-hi edge 18 9 13 9
INT active-hi edge 18 10 13 10
INT active-hi edge 18 12 13 12
INT active-hi edge 18 14 13 14
INT active-hi edge 18 15 13 15
INT active-lo level 0 17:A 13 18
INT active-lo level 0 9:A 13 17
INT active-lo level 0 6:A 13 18
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
bus ID: 0 address type: memory address
address base: 0xd4000
address range: 0x4000
--
bus ID: 0 address type: memory address
address base: 0xd8000
address range: 0x4000
--
bus ID: 0 address type: memory address
address base: 0xdc000
address range: 0x4000
--
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
bus ID: 0 address type: memory address
address base: 0x4000000
address range: 0xfc000000
--
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=1 # number of CPUs
#options NBUS=2 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
===============================================================================
--
-[ Philippe Regnauld / sysadmin / regnauld@deepo.prosa.dk / +55.4N +11.3E ]-
The Internet is busy. Please try again later.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980817220046.44173>