Date: Wed, 9 Dec 1998 16:46:07 -0700 (MST) From: "Kenneth D. Merry" <ken@plutotech.com> To: wilko@yedi.iaf.nl (Wilko Bulte) Cc: roberto@keltia.freenix.fr, FreeBSD-SCSI@FreeBSD.ORG Subject: Re: Tandberg TDC 3600 on CAM, 3.0-R Message-ID: <199812092346.QAA06233@panzer.plutotech.com> In-Reply-To: <199812092227.XAA01240@yedi.iaf.nl> from Wilko Bulte at "Dec 9, 98 11:27:38 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Wilko Bulte wrote... > As Ollivier Robert wrote... > > According to Kris Kirby: > > > sa0 at adv0 bus 0 target 2 lun 0 > > > sa0: <TANDBERG TDC 3600 A07:> Removable Sequential Access SCSI1 device > > > sa0: 3.300MB/s transfers > > > > I have the same drive although with an updated BIOS that makes it SCSI2 > > compatible: > > > > sa1 at ncr0 bus 0 target 4 lun 0 > > sa1: <TANDBERG TDC 3600 =08:> Removable Sequential Access SCSI2 device > > sa1: 3.300MB/s transfers > > > > I use an ASUS SC-875 and it works fine. Can you try to get an updated EPROM ? > > Probably means you have to pull the eprom from your's and send an image of > it's contents to Kris... It would probably be quicker and easier to try Joerg's quirk entries for that drive and see if they work. (you might have to adjust the firmware revision number for it to work) Ken -- Kenneth Merry ken@plutotech.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199812092346.QAA06233>