Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 17 Mar 2005 22:43:15 -0500
From:      "John A." <johna9999@gmail.com>
To:        freebsd-questions@freebsd.org
Subject:   Re: Ethernet issue: works one way but not another
Message-ID:  <1ddef267050317194320705b57@mail.gmail.com>
In-Reply-To: <a64c109e050317151843c60518@mail.gmail.com>
References:  <1ddef26705031618062ca77d49@mail.gmail.com> <a64c109e0503161816671a3cf3@mail.gmail.com> <1ddef267050317082121efe523@mail.gmail.com> <a64c109e050317151843c60518@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
No problem with the english, if you didn't mention it, I wouldn't have known.

I can ping FBSD from M$, can't ping anything from FBSD.

M$ box works when plugged into hub and directly into radio.

All systems are on same subnet.

FBSD box worked when plugged into a 100mb hub, but doesn't work when
plugged into 10mb hub or directly into radio.  Both hubs are 3Com and
are working with other systems plugged into them.

FBSD has no firwall configured.  All I did was perform a standard
installation loading all binaries and sources from ftp.

I just tested another FBSD 5.3 box that I have and it does the same
thing, works fine at 100mb, but appears to get lost at 10mb.

Hope this answers some of your questions.

John A.

On Fri, 18 Mar 2005 01:18:46 +0200, abu khaled <khaled.abu@gmail.com> wrote:
> 
> First, you have to excuse my English it is my third language and I do
> not have that much experience.
> 
> This seems like a puzzle to me and I cannot figure out the topology of
> your network.
> 
> * Can you ping the M$ box from FreeBSD? You need to enable incoming
> echo request in M$ firewall.
> * Are both systems on the same subnet?
> * Have you tried to plug the radio directly into FreeBSD box and test
> the connection like you did for M$ box?
> * Does your FreeBSD box have a firewall configured?
> 
> You mentioned that the connection works if you plug the radio directly
> to M$ box. Does it also work when you plug both to the hub? If not
> then it might be a crossover cable problem.
> 
> As you can see, many pices in this puzzle need sorting out.
> 
> --
> Kind regards
> Abu Khaled
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1ddef267050317194320705b57>