Date: Tue, 28 Mar 2000 00:19:07 -0800 (PST) From: David Yeske <dyeske@yahoo.com> To: freebsd-hackers@freebsd.org Subject: hard drive problems Message-ID: <20000328081907.25476.qmail@web110.yahoomail.com>
next in thread | raw e-mail | index | archive | help
I am getting a nasty error and I would like to resolve it. I know my hard drive is "ok" according
to a couple of different tests including Western Digital DLT 2.2. Here is the error and after
that is my dmesg.
ad0: UDMA ICRC READ ERROR blk# 3500173 retrying
ad0: UDMA ICRC READ ERROR blk# 3500173 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709ata0-master: WARNING: WAIT_READY active=ATA_ACTIVE_ATA
falling back to PIO mode
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #4: Sun Mar 26 17:24:17 EST 2000
root@stuff:/usr/src/sys/compile/KERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D+ Processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134152192 (131008K bytes)
avail memory = 127004672 (124028K bytes)
Preloaded elf kernel "kernel" at 0xc02f9000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdffff000-0xdfffffff irq 10 at device 2.0
on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2
uhub1: 4 ports with 4 removable, bus powered
ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.10, addr 3, iclass 3/1
ums0: 4 buttons and Z dir.
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Promise ATA33 controller> port
0xdf80-0xdf9f,0xdbe4-0xdbe7,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 irq 5 at device 14.0 on pci0
atapci1: <AcerLabs Aladdin ATA33 controller> port 0xffa0-0xffaf irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 16.0 irq 11
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xde80-0xdebf mem
0xdfe00000-0xdfefffff,0xdfffe000-0xdfffefff irq 11 at device 18.0 on pci0
fxp0: Ethernet address 00:d0:b7:49:9e:a8
fxp0: supplying EUI64: 00:d0:b7:ff:fe:49:9e:a8
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 6149MB <WDC AC26400R> [13328/15/63] at ata0-master using UDMA33
ata1-master: Aladdin: two atapi devices on this channel, no DMA
acd0: CD-RW <RICOH CD-R/RW MP7040A> at ata1-master using PIO4
ata1-slave: Aladdin: two atapi devices on this channel, no DMA
afd0: 120MB <LS-120 COSM 05 UHD Floppy> [963/8/32] at ata1-slave using PIO2
Mounting root from ufs:/dev/ad0s2a
fxp0: starting DAD for fe80:0001::02d0:b7ff:fe49:9ea8
fxp0: DAD complete for fe80:0001::02d0:b7ff:fe49:9ea8 - no duplicates found
ad0: UDMA ICRC READ ERROR blk# 3500173 retrying
ad0: UDMA ICRC READ ERROR blk# 3500173 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709 retrying
ad0: UDMA ICRC READ ERROR blk# 3499709ata0-master: WARNING: WAIT_READY active=ATA_ACTIVE_ATA
falling back to PIO mode
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000328081907.25476.qmail>