Date: Wed, 12 Apr 2000 00:56:44 -0700 From: Alfred Perlstein <bright@wintelcom.net> To: chip <chip@wiegand.org> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: I'm at a loss for a way to mount this second harddrive Message-ID: <20000412005644.F4381@fw.wintelcom.net> In-Reply-To: <00041121362901.01762@chip.wiegand.org>; from chip@wiegand.org on Tue, Apr 11, 2000 at 09:09:31PM -0700 References: <20000411211711.C4381@fw.wintelcom.net> <00041121362901.01762@chip.wiegand.org>
next in thread | previous in thread | raw e-mail | index | archive | help
* chip <chip@wiegand.org> [000411 22:01] wrote: > Okay, here are my results: > chip# fdisk wd3 > ******* Working on device /dev/rwd3 ******* > parameters extracted from in-core disklabel are: > cylinders=341 heads=192 sectors/track=63 (12096 blks/cyl) > > parameters to be used for BIOS calculations are: > cylinders=341 heads=192 sectors/track=63 (12096 blks/cyl) > > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165,(FreeBSD/NetBSD/386BSD) > start 63, size 4124673 (2014 Meg), flag 80 (active) > beg: cyl 0/ sector 1/ head 1; > end: cyl 340/ sector 63/ head 191 > The data for partition 2 is: > <UNUSED> > The data for partition 3 is: > <UNUSED> > The data for partition 4 is: > <UNUSED> > chip# > chip# disklabel wd3s1 > # /dev/rwd3s1: > type: ESDI > disk: wd1s1 > label: > flags: > bytes/sector: 512 > sectors/track: 63 > tracks/cylinder: 192 > sectors/cylinder: 12096 > cylinders: 340 > sectors/unit: 4124673 > rpm: 3600 > interleave: 1 > trackskew: 0 > cylinderskew: 0 > headswitch: 0 # milliseconds > track-to-track seek: 0 # milliseconds > drivedata: 0 > > 8 partitions: > # size offset fstype [fsize bsize bps/cpg] > a: 204800 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 16*) > b: 262144 204800 swap # (Cyl. 16*- 38*) > c: 4124673 0 unused 0 0 # (Cyl. 0 - 340*) > e: 3657729 466944 4.2BSD 1024 8192 16 # (Cyl. 38*- 340*) > chip# > And my fstab - > # Device Mountpoint FStype Options Dump Pass# > /dev/wd1s1b none swap sw 0 0 > /dev/wd1s1a / ufs rw 1 1 > /dev/wd1s1e /usr ufs rw 2 2 > /dev/acd0c /cdrom cd9660 ro,noauto 0 0 > /dev/fd0 /usr/floppy msdos rw,noauto 0 0 > /dev/wd0s1 /usr/windows msdos rw 0 0 > > proc /proc procfs rw 0 0 > > I may be wrong here but it looks like something is wrong in the > second section - disklabel wd3s1. It shows disk wd1s1 which is > already mounted as my working fbsd drive, as shown in the fstab file > above. > Then you last instruction is to mount the drive with the partition > number and letter, in my case > wd3s1a > but that doesn't exist if the /dev directory. wd3s1 and wd3a both > exist though. There are no wd_x_s_x_?_ types listed. And I get > failure messages trying any of the above. > > Maybe my system is missing something? You almost made it. :) Yes, you're missing /dev/ entries for your disks, just do this: cd /dev sh MAKEDEV wd3s1a and they will be created, then you can mount them. -- -Alfred Perlstein - [bright@wintelcom.net|alfred@freebsd.org] "I have the heart of a child; I keep it in a jar on my desk." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000412005644.F4381>