Date: Sat, 29 Apr 2000 23:00:02 -0700 (PDT) From: beirne@limerick.chicago.il.us To: freebsd-bugs@FreeBSD.org Subject: Re: kern/18200: 3com 3c509b recognized twice during boot Message-ID: <200004300600.XAA04206@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/18200; it has been noted by GNATS. From: beirne@limerick.chicago.il.us To: freebsd-gnats-submit@FreeBSD.org, beirne@limerick.chicago.il.us Cc: Subject: Re: kern/18200: 3com 3c509b recognized twice during boot Date: Sun, 30 Apr 2000 00:43:08 -0500 This is a multi-part message in MIME format. --------------455C75F04E3144DFD0392EC2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit When I found my 3Com configuration disk and reconfigured to "optimize driver for 'server'" the problem went away. -- Michael G. Beirne | 3250 N. Wolcott #2, Chicago,IL 60657-2053, (773)348-8438 beirne@limerick.chi.il.us http://miso.wwa.com/~beirne/ *Richard Feynman to Draft Board Psychiatrist "And THIS is MEDICINE?" result:4F --------------455C75F04E3144DFD0392EC2 Content-Type: text/plain; charset=us-ascii; name="dmesg.boot" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000 root@monster.cdrom.com:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... i8254 clock: 1193890 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CPU: AMD Am5x86 Write-Back (486-class CPU) Origin = "AuthenticAMD" Id = 0x4f4 Stepping = 4 Features=0x1<FPU> real memory = 16777216 (16384K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x003d9000 - 0x00ff7fff, 12709888 bytes (3103 pages) avail memory = 12656640 (12360K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6f10 bios32: Entry = 0xf6f20 (c00f6f20) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x6f41 pnpbios: Found PnP BIOS data at 0xc00f9500 pnpbios: Entry = f0000:8cbe Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc03c0000. md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80009040 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [class=060000] [hdr=00] is there (id=88811060) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [class=060000] [hdr=00] is there (id=88811060) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1060, dev=0x8881, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1060, dev=0x886a, revid=0x0d class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1060, dev=0x673a, revid=0x0d class=01-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 pci0: <PCI bus> on pcib0 isab0: <UMC UM8886 ISA Bridge with EIDE> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Unknown PCI ATA controller (generic mode)> at device 18.1 on pci0 atapci0: Busmastering DMA not supported ata2: probe allocation failed Trying Read_Port at 203 TCM5095: adding irq mask 0x9ea8 TCM5095: adding io range 0x210-0x3ef, size=0x10, align=0x10 isa0: if_ep: <3Com 3C509-TPO EtherLink III> at port 0x300-0x310 irq 11 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=03 status0=50 status1=10 ata0: mask=03 status0=50 status1=10 ata0: devices = 0x9 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0045 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 11 on isa0 ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: Ethernet address 00:00:00:00:00:00 bpf: ep0 attached isa_probe_children: probing PnP devices ep1: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 5 on isa0 ep1: Ethernet address 00:10:5a:1c:c5:13 ep1: supplying EUI64: 00:10:5a:ff:fe:1c:c5:13 bpf: ep1 attached BIOS Geometries: 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 1:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors 2:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors 3:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: ppp0 attached new masks: bio 40084040, tty 4003009a, net 400708ba bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: stf0 attached bpf: faith0 attached ad0: <ST34321A/3.15> ATA-4 disk at ata0 as master ad0: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, BIOSPIO ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: piomode=3 dmamode=-1 udmamode=-1 dmaflag=0 acd0: <MATSHITA CR-571/1.0d> CDROM drive at ata0 as slave acd0: read 344KB/s (344KB/s), 256KB buffer, BIOSPIO acd0: Reads: CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM unknown medium, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 8404829, size 8404767 : OK start_init: trying /sbin/init --------------455C75F04E3144DFD0392EC2-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004300600.XAA04206>