Date: Fri, 19 May 2000 11:01:09 +0200 From: Sven Huster <shup@netzmarkt.de> To: freebsd-questions@freebsd.org Subject: large ide doesnt work Message-ID: <20000519110109.A58376@sirius.hq.netzmarkt.de>
next in thread | raw e-mail | index | archive | help
hi there,
i bourght a 20 gb ide hard disk and tried to install it under freebsd 3.4-RELEASE.
if you look at dmesg output below you will see the prob with wd3, which seems to be aroung 2 gb.
whats wrong?
## snip ##
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #0: Sun May 14 19:21:55 CEST 2000
root@renee.mailsurf.com:/usr/src/sys/compile/MAILSURF
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,<b25>>
real memory = 201326592 (196608K bytes)
avail memory = 192983040 (188460K bytes)
Preloaded elf kernel "kernel" at 0xc02b0000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 10 on pci0.18.0
xl0: Ethernet address: 00:50:04:6b:49:c7
xl0: autoneg complete, link status good (half-duplex, 100Mbps)
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SV0844A>
wd0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 1 (wd3): <IBM-DPTA-372050>
wd3: 2016MB (4128768 sectors), 4096 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 0 (atapi): <LTN382/UL22>, removable, intr, dma, iordis
acd0: drive speed 6890KB/sec, 120KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
## snip ##
regards
sven
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000519110109.A58376>