Date: Tue, 18 Jul 2000 13:12:15 -0700 (PDT) From: "Justin T. Gibbs" <gibbs@FreeBSD.org> To: cvs-committers@FreeBSD.org, cvs-all@FreeBSD.org Subject: cvs commit: src/sys/cam cam_ccb.h cam_xpt.c src/sys/cam/scsi scsi_all.c scsi_message.h src/sys/dev/aic7xxx aicasm_insformat.h 93cx6.c 93cx6.h ahc_eisa.c ahc_pci.c aic7xxx.c aic7xxx.h aic7xxx.reg aic7xxx.seq aicasm.c aicasm.h aicasm_gram.y ... Message-ID: <200007182012.NAA12440@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
gibbs 2000/07/18 13:12:15 PDT Modified files: sys/cam cam_ccb.h cam_xpt.c Log: cam_ccb.h: Bring back the CAM_NEGOTIATE ccb flag. This flag indicates that SPI transfer negotiation should occur concurrently with the execution of this CCB. The flag is not yet used by the XPT but is required for proper support of multi-initiator configurations where topology scans cannot rely on a bus reset to invalidate prior negotiations. cam_xpt.c: Don't allow DT transmission rates to be specified for devices that don't have the DT feature listed in their inquiry data. Revision Changes Path 1.19 +5 -1 src/sys/cam/cam_ccb.h 1.89 +10 -1 src/sys/cam/cam_xpt.c Modified files: sys/cam/scsi scsi_all.c scsi_message.h Log: scsi_all.c: Clean up the comments related to the high speed sync rate table for SPI. scsi_message.h: Bring in some SCSI3 message terminology. All SCSI2 names are still preserved for backwards compatibility. Revision Changes Path 1.15 +7 -8 src/sys/cam/scsi/scsi_all.c 1.3 +29 -6 src/sys/cam/scsi/scsi_message.h Modified files: sys/dev/aic7xxx 93cx6.c 93cx6.h ahc_eisa.c ahc_pci.c aic7xxx.c aic7xxx.h aic7xxx.reg aic7xxx.seq aicasm.c aicasm.h aicasm_gram.y aicasm_scan.l aicasm_symbol.c aicasm_symbol.h Added files: sys/dev/aic7xxx aicasm_insformat.h Removed files: sys/dev/aic7xxx sequencer.h Log: o Convert to <inttypes.h> style fixed sized types to facilitate porting to other systems. o Normalize copyright text. o Clean up probe code function interfaces by passing around a single structure of common arguments instead of passing "too many" args in each function call. o Add support for the AAA-131 as a SCSI adapter. o Add support for the AHA-4944 courtesy of "Matthew N. Dodd" <winter@jurai.net o Correct manual termination support for PCI cards. The bit definitions for manual termination control in the SEEPROM were incorrect. o Add support for extracting NVRAM information from SCB 2 for BIOSen that use this mechanism to pass this data to OS drivers. o Properly set the STPWLEVEL bit in PCI config space based on the setting in an SEEPROM. o Go back to useing 32byte SCBs for all controllers. The current firmware allows us to embed 12byte cdbs on all controllers in a 32byte SCB, and larger cdbs are rarely used, so it is a better use of this space to offer more SCBs (32). o Add support for U160 transfers. o Add an idle loop executed during data transfers that prefetches S/G segments on controllers that have a secondary DMA engine (aic789X). o Improve the performance of reselections by avoiding an extra one byte DMA in the case of an SCB lookup miss for the reselecting target. We now keep a 16byte "untagged target" array on the card for dealing with untagged reselections. If the controller has external SCB ram and can support 64byte SCBs, then we use an "untagged target/lun" array to maximize concurrency. Without external SCB ram, the controller is limited to one untagged transaction per target, auto-request sense operations excluded. o Correct the setup of the STPWEN bit in SXFRCTL1. This control line is tri-stated until set to one, so set it to one and then set it to the desired value. o Add tagged queuing support to our target role implementation. o Handle the common cases of the ignore wide residue message in firmware. o Add preliminary support for 39bit addressing. o Add support for assembling on big-endian machines. Big-endian support is not complete in the driver. o Correctly remove SCBs in the waiting for selection queue when freezing a device queue. o Now that we understand more about the autoflush bug on the aic7890, only use the workaround on devices that need it. o Add a workaround for the "aic7890 hangs the system when you attempt to pause it" problem. We can now pause the aic7890 safely regardless of what instruction it is executing. Revision Changes Path 1.6 +4 -4 src/sys/dev/aic7xxx/93cx6.c 1.5 +9 -9 src/sys/dev/aic7xxx/93cx6.h 1.16 +26 -22 src/sys/dev/aic7xxx/ahc_eisa.c 1.32 +354 -235 src/sys/dev/aic7xxx/ahc_pci.c 1.45 +1256 -740 src/sys/dev/aic7xxx/aic7xxx.c 1.20 +320 -130 src/sys/dev/aic7xxx/aic7xxx.h 1.22 +81 -95 src/sys/dev/aic7xxx/aic7xxx.reg 1.96 +628 -578 src/sys/dev/aic7xxx/aic7xxx.seq 1.26 +28 -12 src/sys/dev/aic7xxx/aicasm.c 1.9 +4 -1 src/sys/dev/aic7xxx/aicasm.h 1.9 +34 -6 src/sys/dev/aic7xxx/aicasm_gram.y 1.11 +6 -2 src/sys/dev/aic7xxx/aicasm_scan.l 1.9 +5 -2 src/sys/dev/aic7xxx/aicasm_symbol.c 1.9 +8 -5 src/sys/dev/aic7xxx/aicasm_symbol.h To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe cvs-all" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007182012.NAA12440>