Date: Thu, 31 Aug 2000 14:23:58 +0200 From: "Christophe Prevotaux" <chris@hexanet.fr> To: freebsd-hardware@freebsd.org Subject: [HELP] USB , Gateway Solo 2150 and CURRENT Message-ID: <200008311223.OAA02849@proton.hexanet.fr>
index | next in thread | raw e-mail
I am running CURRENT on my Gateway Solo 2150 Laptop
among the problems I have
uhci0 keeps telling me this:
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
However I have no option to switch on or off USB support in my Laptop BIOS
I can it seems set on or off the PNP thing even though it is not called that
way
in the PhoenixBios ( it is called Other/Win95/Win98-2000 i think :))
How can do to make my USB support work ?
I also still have the problem of my PCMCIA-Cardbus DLINK DFE 660TX ethernet
card
that is not supported under FreeBSD , but it work very well under Linux
I wonder if someone could not port the Linux driver under FreeBSD ?
below is my full dmesg in the event it could help somebody answer my queries :)
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Aug 28 19:25:26 CEST 2000
root@xxxx.hexanet.fr:/usr/obj/usr/src/sys/ZIPPY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,MMX,FXSR,XMM>
real memory = 167706624 (163776K bytes)
avail memory = 159285248 (155552K bytes)
Preloaded elf kernel "kernel" at 0xc0386000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
pci0: <Intel 82371AB Power management controller> at 7.3
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 8.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 9 at device 8.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC
pci int + CSC serial isa irq]
pci0: <unknown card> (vendor=0x1102, dev=0x8938) at 9.0 irq 5 <- unknown ?
pci0: <unknown card> (vendor=0x11c1, dev=0x0448) at 10.0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
acd0: CDROM <CRN-8241B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
logo_saver: no suitable graphics mode <-- here is another problem I have :)
anyone ?
module_register_init: MOD_LOAD (logo_saver, c11d7b3c, 0) error 19
ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0
ed1: address 00:00:e8:7f:0f:34, type NE2000 (16 bit)
--
--
===================================================================
Christophe Prevotaux Email: chris@hexanet.fr
HEXANET SARL URL: http://www.hexanet.fr/
Z.A Farman Sud Tel: +33 (0)3 26 79 30 05
9 rue Roland Coffignot Direct: +33 (0)3 26 79 08 02
BP415 Fax: +33 (0)3 26 79 30 06
51689 Reims Cedex 2
FRANCE
===================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200008311223.OAA02849>