Date: Sun, 19 Nov 2000 00:51:19 -0800 (PST) From: Mark Diekhans <markd@Kermodei.com> To: freebsd-mobile@FreeBSD.ORG Subject: PCMCIA modems locking up system under 4.1.1 Message-ID: <200011190851.AAA97559@kermodei.com>
next in thread | raw e-mail | index | archive | help
Hi folks, I am having problems with PCMICA modems locking up FreeBSD 4.1.1 on a laptop. This happens rather frequently, probably most often on card eject, although it happens other times as well. The two modem cards that this occurs with are: MEGAHERTZ CC/XJEM3336 (modem of multifunction) U.S. Robotics XJ/CC1560J The XJ/CC1560J causes the lock up more frequently. Other than locking up the system, the modems work. The XJ/CC1560J perfectly, the CC/XJEM3336 has some issues with multi-second pauses (which I believe is unrelated). The system is a Sharp Actus 290 with a Ricoh RL5C475 PCI-CardBus Bridge. pccard.conf has: irq 15 memory 0xd0000 16k although experimenting with other values hasn't resulted in any improvement. dmesg output appended; any suggest greatly appreciated, Mark apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <Trident model 9525 VGA-compatible display device> at 2.0 irq 0 rl0: <RealTek 8139 10/100BaseTX> port 0xf800-0xf8ff mem 0xfeddfc00-0xfeddfcff irq 10 at device 3.0 on pci0 rl0: Ethernet address: 08:00:1f:06:d3:8e miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0 pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 11.0 pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 12.0 sc0: <System console> on isa0 sc0: VGA <4 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0 pcic0: management irq 3 pccard0: <PC Card bus -- kludge version> on pcic0 unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0e03> can't assign resources unknown: <PNP0f13> can't assign resources unknown: <PNP0700> can't assign resources ad0: 8623MB <FUJITSU MHK2090AT> [17520/16/63] at ata0-master using UDMA33 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200011190851.AAA97559>