Date: Tue, 05 Dec 2000 22:40:47 +0000 From: Brian Somers <brian@Awfulhak.org> To: "Leif Neland" <leif@neland.dk> Cc: "Brian Somers" <brian@Awfulhak.org>, freebsd-current@FreeBSD.ORG, brian@Awfulhak.org Subject: Re: How to debug ppp Message-ID: <200012052240.eB5MelY05557@hak.lan.Awfulhak.org> In-Reply-To: Message from "Leif Neland" <leifn@neland.dk> of "Tue, 05 Dec 2000 22:42:28 %2B0100." <02c201c05f04$a12c0b20$0e00a8c0@neland.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
What happens if you ``disable acfcomp protocomp'' and ``deny acfcomp protocomp'' in your config ? This should be negotiable with isdn.... but perhaps our requesting it is upsetting the peer ? > It still doesn't work sometimes. > > I have a complete log (From dialing to hangup) at > http://www.neland.dk/arnold.log > My ppp.conf is at http://www.neland.dk/arnold.conf > > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC > 00:10:bc:06:fa:00 > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart > Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped --> > Ack-Se > nt > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = > Ack-Se > nt > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC > 00:10:bc:06:fa:00 > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = > Ack-Se > nt > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 > Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > ----- Original Message ----- > From: "Brian Somers" <brian@Awfulhak.org> > To: "Leif Neland" <leif@neland.dk> > Cc: <freebsd-current@FreeBSD.ORG>; <brian@Awfulhak.org> > Sent: Wednesday, November 29, 2000 2:10 AM > Subject: Re: How to debug ppp > > > > Well, I haven't seen this before !!! > > > > Your ISP is *insisting* that you negotiate a multi-link connection. > > You can do this by simply adding > > > > set mrru 1506 > > > > to your config. > > > > > I sometimes have trouble connecting to my flat-rate isp via i4bsd. > > > Most of the time it works, but sometimes the handshake fails. > > > What is the log trying to tell me here? What can I tell my isp? > > > > > > When it fails, I can connect to another isp, which charges per minute > > > charges, which I rather not use > > > when I have flat rate. > > > > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: xxxxxxxxx > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening -> dial > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial -> carrier > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD > detected > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier -> login > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login -> lcp > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a > transport > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial --> > > > Closed > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state > for > > > 2 s > > > econds > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed --> > > > Stopped > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = > > > Stopped > > > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > > 00:10:bc:06:fa:00 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = > > > Stopped > > > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = > > > Stopped > > > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped --> > > > Req-Sent > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = > > > Req-Sent > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > > 00:10:bc:06:fa:00 > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state = > > > Req-Sent > > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Looping: > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(3) state = > > > Req-Sent > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > > 00:10:bc:06:fa:00 > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(3) state = > > > Req-Sent > > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > > Until hangup > > > > > > Leif -- Brian <brian@Awfulhak.org> <brian@[uk.]FreeBSD.org> <http://www.Awfulhak.org>; <brian@[uk.]OpenBSD.org> Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200012052240.eB5MelY05557>