Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 11 Mar 2001 15:05:28 +0100
From:      Christian Weisgerber <naddy@mips.inka.de>
To:        Matthew Jacob <mjacob@feral.com>
Cc:        freebsd-bugs@FreeBSD.ORG
Subject:   Re: bin/25361: dump(8) command segfaults
Message-ID:  <20010311150528.A455@kemoauc.mips.inka.de>
In-Reply-To: <Pine.BSF.4.21.0103100243380.85457-100000@beppo.feral.com>; from mjacob@feral.com on Sat, Mar 10, 2001 at 02:44:26AM -0800
References:  <200103061740.f26He2D69939@freefall.freebsd.org> <Pine.BSF.4.21.0103100243380.85457-100000@beppo.feral.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Matthew Jacob:

> I cannot reproduce it. This with today's top 'o tree. I have a DEVFS
> filesystem.

Top of the tree, March 10, GENERIC kernel.
The problem still persists.

I don't have the faintest idea what it is about my system that
triggers this bug, but it hasn't gone away.

---------------- dmesg ---------------- 
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Mar 11 05:33:31 CET 2001
    naddy@kemoauc.mips.inka.de:/home/obj/usr/src/sys/GENERIC
EB164
Digital AlphaPC 164 500 MHz, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000800020117
real memory  = 265904128 (259672K bytes)
avail memory = 251691008 (245792K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xfffffc00007d0000.
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x10200-0x1023f irq 2 at device 5.0 on pci0
xl0: interrupting at CIA irq 2
xl0: Ethernet address: 00:60:97:4b:1a:b9
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <810a> port 0x10100-0x101ff mem 0x82835100-0x828351ff irq 0 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at CIA irq 0
sym1: <875> port 0x10000-0x100ff mem 0x82834000-0x82834fff,0x82835000-0x828350ff irq 1 at device 7.0 on pci0
sym1: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym1: interrupting at CIA irq 1
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 9.0 (no driver attached)
atapci0: <CMD 646 ATA controller> port 0x10240-0x1024f irq 5 at device 11.0 on pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "alpha"  frequency 499995684 Hz
Waiting 15 seconds for SCSI devices to settle
sa0 at sym0 bus 0 target 5 lun 0
sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/da0a
da1 at sym1 bus 0 target 1 lun 0
da1: <MICROP 4343WS X502> Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4146MB (8491920 512 byte sectors: 255H 63S/T 528C)
da0 at sym1 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
cd0 at sym1 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.01> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
-- 
Christian "naddy" Weisgerber                          naddy@mips.inka.de

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010311150528.A455>