Date: Sun, 8 Apr 2001 00:28:45 -0400 From: David Banning <david@www3.pacific-pages.com> To: Jon Collis <jon@nmt.edu> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: PPP negoatiation, LCP and immediate Disconnected! Message-ID: <20010408002845.E36393@www3.pacific-pages.com> In-Reply-To: <3ACF7DD8.7AE7B3CA@nmt.edu>; from jon@nmt.edu on Sat, Apr 07, 2001 at 02:51:36PM -0600 References: <3ACF7DD8.7AE7B3CA@nmt.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
I can't pinpoint your problem for sure, but my guess is your line;
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
I use a dialup line too, with a dynamic ip address.
Here is my ppp.conf which includes auto login (I changed my login and password)
To fireup my ppp I execute;
ppp -auto -nat -quiet ondemand
Here it is;
default:
#
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set timeout 0
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATZ OK ATM0 OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0
add default HISADDR
enable dns
ondemand:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
set timeout 540
set phone 4166422952
set authname myloginname
set authkey mypassword
On Sat, Apr 07, 2001 at 02:51:36PM -0600, Jon Collis wrote:
> Hello,
>
>
> I have recently installed the 4.2-RELEASE version of FreeBSD. My
> computer is an Intel P3.
>
> I am trying to get my ppp up an running. If I open a term to /dev/cuaa3,
> I am able to dial my provider and connect such that I can browse the
> web. The only problem, is that I am having to type in my username and
> password at the prompts. So, I have created an entry in the ppp.conf
> file for my provider and using the "dial myprovider" command in ppp I
> try to connect, but I cannot. Chat works well and it just fails at the
> last step where it is actually negotiating the ppp connection. This
> seems very odd to me. Is there something about the default setting which
> negotiates ppp in a different manner? Looking at the log, it seems as
> though it actually connects for, say, less than a minute, but I can
> never access to web.
>
> I am being assigned an IP from my provider for what it is worth. Should
> I look for that assignment in my chat script? Well, any suggestions
> would be much appreciated. Here is the ppp.log information followed by
> my ppp.conf file:
>
> Apr 7 12:11:24 ppp[572]: Phase: Using interface: tun0
> Apr 7 12:11:24 ppp[572]: Phase: deflink: Created in closed state
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: set speed 115200
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: set dial ABORT BUSY
> ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T
> TIMEOUT 40 CONNECT
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: set ifaddr 10.0.0.1/0
> 10.0.0.2/0 255.255.255.0 0.0.0.0
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: set timeout 120
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: add default HISADDR
> Apr 7 12:11:24 ppp[572]: tun0: Command: default: enable dns
> Apr 7 12:11:24 ppp[572]: tun0: Phase: PPP Started (interactive mode).
> Apr 7 12:11:27 ppp[572]: tun0: Command: /dev/tty: dial nmt
> Apr 7 12:11:27 ppp[572]: tun0: Command: nmt: set phone 8354543
> Apr 7 12:11:27 ppp[572]: tun0: Command: nmt: set login ABORT
> NO\sCARRIER TIMEOUT 120 name:-\r-name: jon word: wu_wei > ppp
> Apr 7 12:11:27 ppp[572]: tun0: Command: nmt: set openmode active 3
> Apr 7 12:11:27 ppp[572]: tun0: Phase: bundle: Establish
> Apr 7 12:11:27 ppp[572]: tun0: Phase: deflink: closed -> opening
> Apr 7 12:11:27 ppp[572]: tun0: Phase: deflink: Connected!
> Apr 7 12:11:27 ppp[572]: tun0: Phase: deflink: opening -> dial
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Phone: 8354543
> Apr 7 12:11:27 ppp[572]: tun0: Chat: deflink: Dial attempt 1 of 1
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Send: AT^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Expect(5): OK
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Received: AT^M^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Received: OK^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Send: ATE1Q0^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Expect(5): OK
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Received: ATE1Q0^M^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Received: OK^M
> Apr 7 12:11:27 ppp[572]: tun0: Chat: Send: ATDT8354543^M
> Apr 7 12:11:29 ppp[572]: tun0: Chat: Expect(40): CONNECT
> Apr 7 12:11:56 ppp[572]: tun0: Chat: Received: ATDT8354543^M^M
> Apr 7 12:11:56 ppp[572]: tun0: Chat: Received: CONNECT
> Apr 7 12:11:56 ppp[572]: tun0: Phase: deflink: dial -> carrier
> Apr 7 12:11:57 ppp[572]: tun0: Phase: deflink: /dev/cuaa3: CD detected
>
> Apr 7 12:11:57 ppp[572]: tun0: Phase: deflink: carrier -> login
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Expect(120): name:
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> 24000/ARQ/V34/LAPM/V42BIS^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: Type the full name
> of the computer you wish to use. (RLOGIN now default)^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> ----------------------------------------------------------------------------^M
>
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| NOTE:
> for AUTHORIZED MODEM USERS (only) |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*|
> ======================================= |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| To login
> please use the password from your TCC account. |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*|
> ******************************************************* |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| (use
> <CTRL> ^ x to return to the server prompt) |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> |*|
> |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| 835-6740: <=
> 28.8K-baud, ON-campus only (20 lines total). |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| 835-4543: <=
> 28.8K-baud, OFF-campus only (120 lines total). |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> |*|
> |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| There is a 6-hour
> absolute session timeout on these lines. |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> |*|
> |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| For Non-PPP file
> transfer issue following commands at server prompt: |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*|
> --------------------------------------------------------------------
> |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| TERMINAL
> FLOWCONTROL NONE {abbreviated TER FLOW NONE} |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| TERMINAL
> FLOWCONTROL HARDWARE {should be the default; but ...} |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| TERMINAL NO
> ESCAPE-CHARACTER |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| (if TELNET is
> used then you must issue TERM DOWNLOAD as well) |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: |*| (if using sz
> try the flag -kw4096, or -kw 4096 {maybe even 1024}) |*|^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received:
> ----------------------------------------------------------------------------^M
>
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: CONNECTION
> SERVICE FOR USE BY VALID ACCOUNT HOLDERS ONLY.^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: User Access
> Verification^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Received: Username:
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Send: xxx^M
> Apr 7 12:11:57 ppp[572]: tun0: Chat: Expect(120): word:
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Received: xxx^M
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Received: Password:
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Send: xxxx^M
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Expect(120): >
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Received: ^M
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Received: grissom>
> Apr 7 12:11:58 ppp[572]: tun0: Chat: Send: ppp^M
> Apr 7 12:11:58 ppp[572]: tun0: Phase: deflink: login -> lcp
> Apr 7 12:11:58 ppp[572]: tun0: LCP: FSM: Using "deflink" as a
> transport
> Apr 7 12:11:58 ppp[572]: tun0: LCP: deflink: State change Initial -->
> Closed
> Apr 7 12:11:58 ppp[572]: tun0: Phase: deflink: Entering STOPPED state
> for 3 seconds
> Apr 7 12:11:58 ppp[572]: tun0: LCP: deflink: State change Closed -->
> Stopped
> Apr 7 12:12:01 ppp[572]: tun0: LCP: deflink: LayerStart
> Apr 7 12:12:01 ppp[572]: tun0: LCP: deflink: SendConfigReq(1) state =
> Stopped
> Apr 7 12:12:01 ppp[572]: tun0: LCP: ACFCOMP[2]
> Apr 7 12:12:01 ppp[572]: tun0: LCP: PROTOCOMP[2]
> Apr 7 12:12:01 ppp[572]: tun0: LCP: ACCMAP[6] 0x00000000
> Apr 7 12:12:01 ppp[572]: tun0: LCP: MRU[4] 1500
> Apr 7 12:12:01 ppp[572]: tun0: LCP: MAGICNUM[6] 0x720110f0
> Apr 7 12:12:01 ppp[572]: tun0: LCP: deflink: State change Stopped -->
> Req-Sent
> Apr 7 12:12:04 ppp[572]: tun0: LCP: deflink: SendConfigReq(1) state =
> Req-Sent
> Apr 7 12:12:04 ppp[572]: tun0: LCP: ACFCOMP[2]
> Apr 7 12:12:04 ppp[572]: tun0: LCP: PROTOCOMP[2]
> Apr 7 12:12:04 ppp[572]: tun0: LCP: ACCMAP[6] 0x00000000
> Apr 7 12:12:04 ppp[572]: tun0: LCP: MRU[4] 1500
> Apr 7 12:12:04 ppp[572]: tun0: LCP: MAGICNUM[6] 0x720110f0
> Apr 7 12:12:07 ppp[572]: tun0: LCP: deflink: SendConfigReq(1) state =
> Req-Sent
> Apr 7 12:12:07 ppp[572]: tun0: LCP: ACFCOMP[2]
> Apr 7 12:12:07 ppp[572]: tun0: LCP: PROTOCOMP[2]
> Apr 7 12:12:07 ppp[572]: tun0: LCP: ACCMAP[6] 0x00000000
> Apr 7 12:12:07 ppp[572]: tun0: LCP: MRU[4] 1500
> Apr 7 12:12:07 ppp[572]: tun0: LCP: MAGICNUM[6] 0x720110f0
> Apr 7 12:12:10 ppp[572]: tun0: LCP: deflink: SendConfigReq(1) state =
> Req-Sent
> Apr 7 12:12:10 ppp[572]: tun0: LCP: ACFCOMP[2]
> Apr 7 12:12:10 ppp[572]: tun0: LCP: PROTOCOMP[2]
> Apr 7 12:12:10 ppp[572]: tun0: LCP: ACCMAP[6] 0x00000000
> Apr 7 12:12:10 ppp[572]: tun0: LCP: MRU[4] 1500
> Apr 7 12:12:10 ppp[572]: tun0: LCP: MAGICNUM[6] 0x720110f0
> Apr 7 12:12:14 ppp[572]: tun0: LCP: deflink: SendConfigReq(1) state =
> Req-Sent
> Apr 7 12:12:14 ppp[572]: tun0: LCP: ACFCOMP[2]
> Apr 7 12:12:14 ppp[572]: tun0: LCP: PROTOCOMP[2]
> Apr 7 12:12:14 ppp[572]: tun0: LCP: ACCMAP[6] 0x00000000
> Apr 7 12:12:14 ppp[572]: tun0: LCP: MRU[4] 1500
> Apr 7 12:12:14 ppp[572]: tun0: LCP: MAGICNUM[6] 0x720110f0
> Apr 7 12:12:17 ppp[572]: tun0: LCP: deflink: LayerFinish
> Apr 7 12:12:17 ppp[572]: tun0: LCP: deflink: State change Req-Sent -->
> Stopped
> Apr 7 12:12:17 ppp[572]: tun0: LCP: deflink: State change Stopped -->
> Closed
> Apr 7 12:12:17 ppp[572]: tun0: LCP: deflink: State change Closed -->
> Initial
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: Disconnected!
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: lcp -> logout
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: logout -> hangup
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: Disconnected!
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: Connect time: 50 secs:
> 3021 octets in, 275 octets out
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: : 140 packets in, 5
> packets out
> Apr 7 12:12:17 ppp[572]: tun0: Phase: total 65 bytes/sec, peak 332
> bytes/sec on Sat Apr 7 12:12:17 2001
> Apr 7 12:12:17 ppp[572]: tun0: Phase: deflink: hangup -> closed
> Apr 7 12:12:17 ppp[572]: tun0: Phase: bundle: Dead
>
>
> Sorry about that huge thing if it offends. I am now going to include my
> ppp.conf file. Perhaps there is something that I need to add to it, but
> I have tried setting the mode to active or passive to no avail.
>
> default:
> ident user-ppp VERSION (built COMPILATIONDATE)
>
> # Ensure that "device" references the correct serial port
> # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
> #
> set device /dev/cuaa3
>
> set log Phase Chat Connect LCP IPCP CCP tun command
> set speed 115200
> set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
> \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
> set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> set timeout 120 # 3 mintue idle timer (the
> default)
> add default HISADDR # Add a (sticky) default route
> enable dns # request DNS info (for
> resolv.conf)
>
> myprovider:
> set phone 8354543
> set login "ABORT NO\\sCARRIER TIMEOUT 120 name:-\\r-name: xxx word: xxx
> \> ppp"
>
>
>
> Well, that's all of that. Thanks for any help that you can send,
>
> Jon Collis
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
--
Real Users hate Real Programmers.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010408002845.E36393>