Date: Wed, 16 May 2001 10:48:21 -0700 From: David Greenman <dg@root.com> To: Vivek Khera <khera@kcilink.com> Cc: stable@freebsd.org Subject: Re: dual fxp ethernet, one doesn't "work" Message-ID: <20010516104821.A19893@nexus.root.com> In-Reply-To: <x78zjx9oww.fsf@onceler.kciLink.com>; from khera@kcilink.com on Wed, May 16, 2001 at 01:36:31PM -0400 References: <15105.44534.131385.573668@onceler.kciLink.com> <x78zjx9oww.fsf@onceler.kciLink.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>>>>>> "VK" == Vivek Khera <khera@kcilink.com> writes: > >VK> Box name "m02": > >VK> [m02]% ifconfig -a >VK> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >VK> inet 192.168.200.65 netmask 0xffffff00 broadcast 192.168.200.255 >VK> ether 00:b0:d0:e1:34:de >VK> media: autoselect (100baseTX) status: active >VK> supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> >VK> fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 >VK> inet 192.168.100.2 netmask 0xffffff00 broadcast 192.168.100.255 >VK> ether 00:b0:d0:e1:34:df >VK> media: autoselect (10baseT/UTP) status: active >VK> supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> >VK> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 >VK> inet 127.0.0.1 netmask 0xff000000 > >Ok... more data. It is definitely a FreeBSD problem with dual fxp >NICs. > >Evidence: > >I swapped the cables and IP numbers for fxp1 and fxp0. Now, fxp1 >works and fxp0 doesn't. That is, the interface I assign to >192.168.100.2 doesn't work, but the one assinged 192.168.200.64 works >fine. The order in which they are assigned doesn't matter. > >Is there some magic to the 192.168.100.2 address? Can you provide us with the output of 'netstat -rna'? -DG David Greenman Co-founder, The FreeBSD Project - http://www.freebsd.org President, TeraSolutions, Inc. - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010516104821.A19893>