Date: Thu, 14 Jun 2001 06:50:22 -0700 From: Ben Lovett <blovett@bsdguru.com> To: mobile@freebsd.org Subject: Dell Inspiron 8000 and APM Message-ID: <20010614065022.A1819@bsdguru.com>
next in thread | raw e-mail | index | archive | help
--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hey all,
I just got a Dell Inspiron 8000 laptop, and am in the process of
configuring it to my liking. So, I have found that I am able to suspend
the system once, but after resuming after that first time, I am unable
to suspend for a second time, resulting in a full hang of the system.
So, I'm curious if anyone else has come across such symptoms, and has
any clues of how I can remedy this, since its a total pain to be unable
to suspend more than once ;)
dmesg output is attached...
Thanks!
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Ben Lovett printf("Hello world!);
blovett@bsdguru.com return 0;
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Failure is not an option. It comes bundled with your Microsoft product.
--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #3: Wed Jun 13 14:08:10 PDT 2001
donar@dilbert:/usr/obj/usr/src/sys/DILBERT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (898.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201244672 (196528K bytes)
avail memory = 192016384 (187516K bytes)
Preloaded elf kernel "kernel" at 0xc0393000.
Preloaded elf module "snd_maestro3.ko" at 0xc039309c.
Preloaded elf module "snd_pcm.ko" at 0xc0393140.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4d46 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcm0: <ESS Technology Maestro3> port 0xdc00-0xdcff mem 0xf6ffe000-0xf6ffffff irq 5 at device 3.0 on pci2
pcib3: <PCI to PCI bridge (vendor=1668 device=0100)> at device 6.0 on pci2
pci8: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xf8e00000-0xf8efffff,0xf8fff000-0xf8ffffff irq 11 at device 4.0 on pci8
fxp0: Ethernet address 00:20:e0:67:c1:b6
pci8: <unknown card> (vendor=0x11c1, dev=0x0448) at 8.0 irq 11
chip1: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.0 on pci2
chip2: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.1 on pci2
pci2: <unknown card> (vendor=0x104c, dev=0x8027) at 15.2 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at 31.2 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA66
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
WARNING: / was not properly dismounted
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xbce0-0xbcff irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
--ZGiS0Q5IWpPtfppv--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010614065022.A1819>