Date: Tue, 21 Aug 2001 10:57:19 -0700 (PDT) From: Shizuka Kudo <shizukakudo_99@yahoo.com> To: mobile@freebsd.org Subject: latest commit cannot detect pcic Message-ID: <20010821175719.46559.qmail@web11404.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Warner, Your latest commit on pcic & pcibios could not detect my TI 1225 adapter. It worked before today's commit. Here's the dmesg. > > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. All > rights reserved. > FreeBSD 4.4-RC #3: Wed Aug 22 01:25:34 HKT 2001 > > root@shizuka.purple.com.hk:/usr/obj/usr/src/sys/SHIZUKA > Calibrating clock(s) ... TSC clock: 900094814 Hz, > i8254 clock: 1193308 Hz > CLK_USE_I8254_CALIBRATION not specified - using > default frequency > Timecounter "i8254" frequency 1193182 Hz > CLK_USE_TSC_CALIBRATION not specified - using old > calibration method > CPU: Pentium III/Pentium III Xeon/Celeron > (900.00-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 268349440 (262060K bytes) > Physical memory chunk(s): > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) > 0x003cc000 - 0x0ffe2fff, 264335360 bytes (64535 > pages) > avail memory = 257589248 (251552K bytes) > bios32: Found BIOS32 Service Directory header at > 0xc00f1430 > bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 > pcibios: PCI BIOS entry at 0xdf0 > pnpbios: Found PnP BIOS data at 0xc00fbe20 > pnpbios: Entry = f0000:be50 Rev = 1.0 > pnpbios: OEM ID cd041 > Other BIOS signatures found: > ACPI: 000f7b10 > Preloaded elf kernel "kernel.new" at 0xc03a6000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Creating DISK md0 > pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c > pci_open(1a): mode1res=0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=060000] [hdr=00] is > there (id=11308086) > apm0: <APM BIOS> on motherboard > apm: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > isa0: <ISA bus> on motherboard > Trying Read_Port at 203 > Trying Read_Port at 243 > Trying Read_Port at 283 > Trying Read_Port at 2c3 > Trying Read_Port at 303 > Trying Read_Port at 343 > Trying Read_Port at 383 > Trying Read_Port at 3c3 > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > fdc0: <NEC 72065B or clone> at port > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 > ata0: mask=03 status0=50 status1=50 > ata0: mask=03 ostat0=50 ostat2=50 > ata0-master: ATAPI probe a=00 b=00 > ata0-slave: ATAPI probe a=00 b=00 > ata0: mask=03 status0=50 status1=50 > ata0-master: ATA probe a=01 b=a5 > ata0-slave: ATA probe a=01 b=a5 > ata0: devices=03 > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 > ata1: mask=03 status0=50 status1=00 > ata1: mask=03 ostat0=50 ostat2=00 > ata1-master: ATAPI probe a=14 b=eb > ata1-slave: ATAPI probe a=00 b=00 > ata1: mask=03 status0=00 status1=00 > ata1: devices=04 > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port > 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x1, > flags:0x3d0000 > psm0: current command byte:0047 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0-00, 2 > buttons > psm0: config:00000000, flags:00000000, packet size:3 > psm0: syncmask:c0, syncbits:00 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > fb0: vga0, vga, type:VGA (5), flags:0x7007f > fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 > 0x20000 > fb0: init mode:24, bios mode:3, current mode:24 > fb0: window:0xc00b8000 size:32k gran:32k, buf:0 > size:32k > VGA parameters upon power-up > 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > VGA parameters in BIOS for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > EGA/VGA parameters to be used for mode 24 > 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 > bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 > b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c > 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd0, terminal emulator: sc (syscons > terminal) > sio0: irq maps: 0x41 0x51 0x41 0x41 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: irq maps: 0x41 0x49 0x41 0x41 > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: ECP SPP ECP+EPP SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on > isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in > COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > plip0: <PLIP network interface> on ppbus0 > bpf: lp0 attached > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > isa_probe_children: probing PnP devices > BIOS Geometries: > 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 > heads, 1..63=63 sectors > 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 > heads, 1..63=63 sectors > 0 accounted for > Device configuration finished. > bpf: sl0 attached > bpf: lo0 attached > bpf: ppp0 attached > new masks: bio 68c040, tty 63109a, net 67109a > Creating DISK ad0 > ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at > ata0-master > ad0: 29314MB (60036480 sectors), 59560 cyls, 16 > heads, 63 S/T, 512 B/S > ad0: 16 secs/int, 1 depth queue, BIOSPIO > ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 > ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at > ata0-master BIOSPIO > Creating DISK ad1 > ad1: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at > ata0-slave > ad1: 29314MB (60036480 sectors), 59560 cyls, 16 > heads, 63 S/T, 512 B/S > ad1: 16 secs/int, 1 depth queue, BIOSPIO > ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 > ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at > ata0-slave BIOSPIO > ata1-master: piomode=4 dmamode=2 udmamode=-1 > dmaflag=1 > acd0: <SONY CD-RW CRX120E/1.0j> CD-RW drive at ata1 > as master > acd0: read 4134KB/s (4134KB/s) write 689KB/s > (689KB/s), 2048KB buffer, BIOSPIO > acd0: Reads: CD-R, CD-RW, CD-DA stream, packet > acd0: Writes: CD-R, CD-RW, test write > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: CD-R 120mm data disc loaded, unlocked > Mounting root from ufs:/dev/ad0s4a > ad0s1: type 0xb, start 63, end = 15020774, size > 15020712 : OK > ad0s2: type 0x83, start 15020775, end = 30057614, > size 15036840 : OK > ad0s3: type 0xb5, start 30057615, end = 45094454, > size 15036840 : OK > ad0s4: type 0xa5, start 45094455, end = 60034904, > size 14940450 : OK > start_init: trying /sbin/init > ad1s1: type 0xc, start 63, end = 60034904, size > 60034842 : OK > splash: image decoder found: logo_saver __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010821175719.46559.qmail>