Date: Sat, 8 Sep 2001 18:21:33 +0200 (MEST) From: Michael Class <michaelc@space.ebiz-hp.com> To: <current@freebsd.org> Subject: boot() called on cpu #1 - hang Message-ID: <20010908181649.G894-100000@localhost>
next in thread | raw e-mail | index | archive | help
Hello,
on a 5.0-current i386-SMP system of today I am still getting on about
every second reboot the message:
boot() called on cpu #1
W
and then the sysetm hangs. When boot is called on cpu #0 everything works
as expected.
I think this started roughly two week from now. But I am not sure
if then boot was only called on cpu #0 or boot worked on cpu #1.
Any suggestions?
Micha
dmesg from the system is:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Sep 8 10:04:26 MEST 2001
michaelc@pc-micha.mc.hp.com:/usr/src/sys/i386/compile/MCSMP2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (998.36-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1048512K bytes)
avail memory = 1040457728 (1016072K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04c7000.
Preloaded elf module "acpi.ko" at 0xc04c709c.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00fdbc0
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 16 -> irq 5
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <serial bus, USB> at device 7.3 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcm0: <Creative EMU10K1> port 0xcc00-0xcc1f irq 5 at device 9.0 on pci0
sym0: <810> port 0xd400-0xd4ff mem 0xda003000-0xda0030ff irq 10 at device 10.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
bktr0: <BrookTree 878> mem 0xda000000-0xda000fff irq 2 at device 12.0 on pci0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
bktr0: Hauppauge Model 61344 D121
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 12.1 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xda002000-0xda00207f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:10:5a:d7:dd:9c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT370 ATA100 controller> port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07 irq 11 at device 14.0 on pci0
ata2: at 0xdc00 on atapci1
ata3: at 0xe400 on atapci1
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc1: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
ppc1: cannot reserve I/O port range
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
linprocfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPv6 packet filtering initialized, default to accept, unlimited logging
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, unlimited logging
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 32634MB <IBM-DPTA-373420> [66305/16/63] at ata0-master tagged UDMA66
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master tagged UDMA100
ad6: 32634MB <IBM-DPTA-373420> [66305/16/63] at ata3-master tagged UDMA66
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s4a
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
-------------------------------------------------------------------------
michael class, viktor-renner str. 39, 72074 tuebingen, frg
E-Mail: michael_class@gmx.net
Phone: +49 7031 14-3707 (work) +49 7071 81950 (private)
-------------------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010908181649.G894-100000>