Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Dec 2001 16:10:21 -0600
From:      Bob Willcox <bob@immure.com>
To:        dochawk@psu.edu
Cc:        Ben Laurie <ben@algroup.co.uk>, questions@FreeBSD.ORG
Subject:   Re: 2 GB?
Message-ID:  <20011212161021.A96739@luke.immure.com>
In-Reply-To: <200112122158.fBCLwTZ08996@fac13.ds.psu.edu>; from dochawk@psu.edu on Wed, Dec 12, 2001 at 04:58:29PM -0500
References:  <20011212092409.C58771@luke.immure.com> <200112122158.fBCLwTZ08996@fac13.ds.psu.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 12, 2001 at 04:58:29PM -0500, dochawk@psu.edu wrote:
> bob bobbled,
> 
> > In my experience, this type of problem has always turned out to be
> > hardware. The more memory DIMMs you install in a MB the more likely it
> > is to happen. I was able to _finally_ get my two dual Athlon systems
> > with Tyan S2460 MBs to work with 1GB (4 256MB DIMMs for a total of 8
> > banks of memory), but only after replacing the MBs with newer revisions.
> > Prior to doing that, I had one of them (with the older rev MB) run fine
> > for 2 months before failing.
> 
> err, don't the specs say it can only handle a six bank load?

I think they do now, but Tyan used to claim that it supported 8 banks.
Indeed, they list a "typical" configuration in their user's manual as
having 4 256MB DIMMs, i.e., 8 banks. It seems that they revised their
spec to only 6 banks when they discovered 8 banks were a problem. :-)

Bob

> 
> hawk
> 
> -- 
> What part of "non-negotiable" didn't you understand? /"\   ASCII ribbon campaign
> dochawk@psu.edu  Smeal 178  (814) 375-4700           \ /   against HTML mail
> These opinions will not be those of                   X    and postings. 
> Penn State until it pays my retainer.                / \   
> 

-- 
Bob Willcox             Boucher's Observation:
bob@vieo.com               He who blows his own horn always plays the music
Austin, TX                 several octaves higher than originally written.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011212161021.A96739>