Date: Thu, 27 Dec 2001 11:06:59 -0800 (PST) From: twig les <twigles@yahoo.com> To: freebsd-questions@FreeBSD.ORG Subject: multiple panics in 4.4 stable Message-ID: <20011227190659.38389.qmail@web10104.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hey all, I'm having a devil of a time here with 4.4
stable. I ssh into my box and sometimes get this
message:
Segmentation fault - core dumped
Then I can't su, instead I get a message saying the
/kernel: pid 207(sh), uid 1001: exited on signal 11
(core dumped)
I've also gotten panics trying to rebuild the kernel;
after doing a config it gives me a panic message and
reboots. I will paste my dmesg at the end of this
mail-it has three panics in it.
I'm no programmer but I think the version of Free4.4
that comes with the new book "FreeBSD Unleashed" may
not be that stable. The machine is a development one
(to be a Snort box) and the hardware is a Supermicro
mobo, 1G RAM (I forget what kind but it's brand-name,
registed, ecc), 18gb Seagate scsi HD, dual p3 1ghz.
As I'm writing this the box panicked and rebooted
itself again.
bash-2.05# dmesg
rq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
panic: pmap_enter: pte vanished, va: 0x28053000
syncing disks... 20 20 2 2
done
Uptime: 21s
Automatic reboot in 15 seconds - press a key on the
console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 518168576 (506024K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f5340
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)>
at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci0: <ATI Mach64-GP graphics accelerator> at 4.0 irq
11
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xde00-0xdeff mem 0xfeafb000-0xfeafbfff irq 5 at
device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255
SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xd400-0xd4ff mem 0xfeafe000-0xfeafefff irq 10 at
device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255
SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port
0xd000-0xd03f mem
0xfe900000-0xfe9fffff,0xfeafc000-0xfeafcfff irq 9 at
device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d8:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at
device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port
0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device
15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge>
on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
WARNING: / was not properly dismounted
pid 141 (cron), uid 0: exited on signal 11 (core
dumped)
panic: pmap_enter: pte vanished, va: 0xbfbff000
syncing disks... 35 35 9 9 3 3
done
Uptime: 1m53s
Automatic reboot in 15 seconds - press a key on the
console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 518168576 (506024K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f5340
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)>
at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci0: <ATI Mach64-GP graphics accelerator> at 4.0 irq
11
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xde00-0xdeff mem 0xfeafb000-0xfeafbfff irq 5 at
device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255
SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xd400-0xd4ff mem 0xfeafe000-0xfeafefff irq 10 at
device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255
SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port
0xd000-0xd03f mem
0xfe900000-0xfe9fffff,0xfeafc000-0xfeafcfff irq 9 at
device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d8:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at
device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port
0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device
15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge>
on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
WARNING: / was not properly dismounted
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xbfca04a8
fault code = supervisor read, page not
present
instruction pointer = 0x8:0xc032999b
stack pointer = 0x10:0xd464e94c
frame pointer = 0x10:0xd464e95c
code segment = base 0x0, limit 0xfffff,
type 0x1b
= DPL 0, pres 1, def32 1, gran
1
processor eflags = interrupt enabled, resume,
IOPL = 0
current process = 171 (su)
interrupt mask = net tty bio cam
trap number = 12
panic: page fault
syncing disks... 11 11 11 11 11 11 11 11 11 11 11 11
11 11 11 11 11 11 11 11
giving up on 11 buffers
Uptime: 1m36s
Automatic reboot in 15 seconds - press a key on the
console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 518168576 (506024K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f5340
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)>
at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci0: <ATI Mach64-GP graphics accelerator> at 4.0 irq
11
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xde00-0xdeff mem 0xfeafb000-0xfeafbfff irq 5 at
device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255
SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xd400-0xd4ff mem 0xfeafe000-0xfeafefff irq 10 at
device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255
SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port
0xd000-0xd03f mem
0xfe900000-0xfe9fffff,0xfeafc000-0xfeafcfff irq 9 at
device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d8:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at
device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port
0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device
15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge>
on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
WARNING: / was not properly dismounted
pid 209 (sh), uid 0: exited on signal 11 (core dumped)
panic: pmap_enter: pte vanished, va: 0x280af000
syncing disks... 12 12
done
Uptime: 15m46s
Automatic reboot in 15 seconds - press a key on the
console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 518168576 (506024K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f5340
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)>
at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci0: <ATI Mach64-GP graphics accelerator> at 4.0 irq
11
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xde00-0xdeff mem 0xfeafb000-0xfeafbfff irq 5 at
device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255
SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xd400-0xd4ff mem 0xfeafe000-0xfeafefff irq 10 at
device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255
SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port
0xd000-0xd03f mem
0xfe900000-0xfe9fffff,0xfeafc000-0xfeafcfff irq 9 at
device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d8:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at
device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port
0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device
15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge>
on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
WARNING: / was not properly dismounted
panic: pmap_enter: pte vanished, va: 0x280af000
syncing disks... 10 10
done
Uptime: 6m5s
Automatic reboot in 15 seconds - press a key on the
console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 518168576 (506024K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f5340
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)>
at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci0: <ATI Mach64-GP graphics accelerator> at 4.0 irq
11
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xde00-0xdeff mem 0xfeafb000-0xfeafbfff irq 5 at
device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255
SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port
0xd400-0xd4ff mem 0xfeafe000-0xfeafefff irq 10 at
device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255
SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port
0xd000-0xd03f mem
0xfe900000-0xfe9fffff,0xfeafc000-0xfeafcfff irq 9 at
device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:d8:44
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at
device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port
0xffa0-0xffaf at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device
15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge>
on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <CD-ROM CDU611-H> at ata0-master using
PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access
SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63,
16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T
2231C)
WARNING: / was not properly dismounted
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011227190659.38389.qmail>