Date: Sat, 13 Apr 2002 00:31:09 -0400 From: Andrew Lankford <arlankfo@141.com> To: freebsd-stable@FreeBSD.ORG Cc: arlankfo@141.com Subject: STABLE Tagged Queuing for DTLA acting up Message-ID: <200204122231484.SM01528@141.com>
next in thread | raw e-mail | index | archive | help
I did a buildworld based on this afternoon's (Friday's) STABLE. Aside from
enabling SSE support in the kernel, I made no other changes before I recompiled. When I rebooted, I got this:
Mounting root from ufs:/dev/ad0s3a
ad0: timeout waiting for READY
ad0: invalidating queued requests
- resetting
ata0: resetting devices .. ad0: invalidating queued requests
done
ad0: no request for tag=0
ad0: invalidating queued requests
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: invalidating queued requests
ata0: resetting devices .. ad0: invalidating queued requests
done
ad0: no request for tag=0
...blah...blah...blah...
Root mount failed: 6
...blah...blah...
mountroot>
Anyway, once I got to the mountroot prompt and specified /dev/ad0s3a AGAIN,
everything was back to normal from then on. As you can see, I have an IBM
DTLA hardrive, and I normally have hw.ata.tags enabled in loader.conf.
Disabling that feature in loader.conf seems to fix the problem, but I the
hw.ata.tags feature worked just fine in the past.
Also, The hw.atamodes sysctl that the ata(4) man page mentions isn't
available, but "atacontrol" now works:
channel 0:
Master = UDMA100
Slave = ???
channel 1:
Master = PIO4
Slave = PIO4
Here are relevant (?) portions from my kernel configuration
(I made no changes to my ATA related changes to the kernel config
with this upgrade).
-------------------------------------------------------
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options ROOTDEVNAME=\"ufs:ad0s3a\" #Fallback root device
# enabling this merely keeps me from getting the mountroot prompt
# but doesn't get rid of the drive errors.
. . .
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
dmesg -a in its full glory:
-----------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Apr 12 23:09:53 EDT 2002
root@bogushost2:/usr/obj/usr/src/sys/ARL0402
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (737.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535736320 (523180K bytes)
avail memory = 502468608 (490692K bytes)
Preloaded elf kernel "kernel" at 0xc1213000.
Preloaded elf module "vesa.ko" at 0xc121309c.
Preloaded elf module "green_saver.ko" at 0xc1213138.
Preloaded elf module "snd_es137x.ko" at 0xc12131dc.
Preloaded elf module "snd_pcm.ko" at 0xc1213280.
Preloaded elf module "usb.ko" at 0xc1213320.
Preloaded elf module "ugen.ko" at 0xc12133bc.
Preloaded elf module "uhid.ko" at 0xc1213458.
Preloaded elf module "ums.ko" at 0xc12134f4.
Preloaded elf module "agp.ko" at 0xc1213590.
Preloaded elf module "md.ko" at 0xc121362c.
Preloaded md_image "/modules/mytmp.ko" at 0xc12136c8.
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc02b6362 (1000022)
VESA: Intel(R) 815 Chipset Video BIOS
Pentium Pro MTRR support enabled
md0: Preloaded image </modules/mytmp.ko> 15728640 bytes at 0xc03111c0
md1: Malloc disk
Using $PIR table, 10 entries at 0xc00f1310
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
sis0: <NatSemi DP83815 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 9 at device 9.0 on pci1
sis0: Ethernet address: 00:02:e3:1c:cf:9e
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1
xl0: Ethernet address: 00:01:02:73:ee:49
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 3 at device 14.0 on pci1
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: Logitech Camera, rev 1.00/1.00, addr 3
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iicbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 5 packets/entry by default
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master tagged UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master PIO4
acd1: DVD-ROM <HITACHI DVD-ROM GD-7500> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
ad0: timeout waiting for READY
ad0: invalidating queued requests
- resetting
ata0: resetting devices .. ad0: invalidating queued requests
done
ad0: no request for tag=0
ad0: invalidating queued requests
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: invalidating queued requests
ata0: resetting devices .. ad0: invalidating queued requests
done
ad0: no request for tag=0
ad0: invalidating queued requests
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: invalidating queued requests
ata0: resetting devices .. ad0: invalidating queued requests
done
ad0: no request for tag=0
ad0: invalidating queued requests
ad0: READ command timeout tag=0 serv=0 - resetting
ad0: invalidating queued requests
ad0: trying fallback to PIO mode
ata0: resetting devices .. ad0: invalidating queued requests
done
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/ad0s3a
Mounting root from ufs:/dev/ad0s3a
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a:
clean, 3030 free
(126 frags, 363 blocks, 0.1% fragmentation)
/dev/ad0s3f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f:
clean, 10667227 free
(58891 frags, 1326042 blocks, 0.4% fragmentation)
/dev/ad0s3e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e:
clean, 15347 free
(339 frags, 1876 blocks, 1.7% fragmentation)
net.inet.tcp.always_keepalive:
0
->
1
net.inet.tcp.blackhole:
0
->
2
net.inet.udp.blackhole:
0
->
1
net.inet.tcp.log_in_vain:
0
->
1
net.inet.ip.fw.dyn_ack_lifetime:
300
->
600
Doing initial network setup:
hostname
.
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.10.10.11 netmask 0xffffff00 broadcast 10.10.10.255
ether 00:02:e3:1c:cf:9e
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
Starting ppp as "root"
Firewall rules loaded, starting divert daemons:
.
Firewall logging=YES
Additional routing options:
IP gateway=YES
TCP keepalive=YES
.
Routing daemons:
.
Clearing /tmp:
.
Additional daemons:
syslogd
.
Doing additional network setup:
ntpd
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
inetd
cron
sshd
usbd
.
find:
/var/tmp/vi.recover: No such file or directory
Initial rc.i386 initialization:
apm
.
Configuring syscons:
cursor
font8x16
font8x14
font8x8
blanktime
screensaver
allscreens
.
Additional ABI support:
linux
.
Local package initialization:
Apr 13 00:25:10 bogushost2 ntpd[87]: sendto(129.6.15.28): Permission denied
Setting the mixer pcm to 75:75.
Setting the mixer vol to 75:75.
Setting the mixer cd to 75:75.
Setting the mixer line1 to 75:75.
Setting the mixer rec to 75:75.
Recording source:
mic
xdm
.
Additional TCP options:
.
Sat Apr 13 00:25:11 EDT 2002
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204122231484.SM01528>