Date: Wed, 9 Oct 2002 04:36:02 UT From: "leegold" <leegold@fastmail.fm> To: freebsd-hardware@freebsd.org Subject: sound card problems Message-ID: <20021009043602.A3CF21AEC222@server5.fastmail.fm>
next in thread | raw e-mail | index | archive | help
card is Creative AWE64 16-but Audio (SB 16 compatible)
In an ISA slot.
I compiled the kernel w/added lines at the end:
......
# Added by user ljg 10/2002
device pcm
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
all went well - I rebooted and did: # cd /dev and # ./MAKEDEV snd0
I noticed in /dev new devices created after this, and I can post an ls
-l
of /dev if needed.
But no sound, KDE can't find the card and dmesg has no mention of it.
Any help appreciated.
Note: in my bios I have plug and play OS disabled.
-------------------
my dmesg shows no sound device (posted below warts and all):
su-2.05$ dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Oct 8 23:35:11 EDT 2002
ljg@:/usr/src/sys/compile/CUSTOM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (233.29-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 126091264 (123136K bytes)
Preloaded elf kernel "kernel" at 0xc047e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc047e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdf40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Rage128-RL graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1420-0x142f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1400-0x141f irq 9
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Hewlett Packard HP USB CD-Writer Plus, rev 1.00/0.01, addr 2
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at
device 7.3 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem
0xf0000000-0xf00000ff irq 10 at device 13.0 on pci0
rl0: Ethernet address: 00:00:e8:9d:02:aa
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xe0000-0xe3fff,0xe4000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio4: <U.S. Robotics 56K Voice INT> at port 0x2f8-0x307 irq 3 on isa0
sio4: type 16550A
ad0: 6533MB <SAMSUNG SV0682D> [14160/15/63] at ata0-master UDMA33
acd0: CDROM <NEC CD-ROM DRIVE:28B> at ata1-master using PIO4
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave using PIO0
Mounting root from ufs:/dev/ad0s3a
ad0s6: slice starts beyond end of the disk: rejecting it
ad0s2: raw partition size != slice size
ad0s2: start 4192965, end 8385929, size 4192965
ad0s2c: start 4192965, end 13366079, size 9173115
ad0s2: truncating raw partition
ad0s2: rejecting partition in BSD label: it isn't entirely within the
slice
ad0s2: start 4192965, end 8385929, size 4192965
ad0s2g: start 6048453, end 11317956, size 5269504
ad0s2: rejecting partition in BSD label: it isn't entirely within the
slice
ad0s2h: start 11317957, end 13366079, size 2048123
su-2.05$
--
http://fastmail.fm/ - IMAP accessible web-mail
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021009043602.A3CF21AEC222>