Date: Tue, 21 Jan 2003 17:33:42 +0000 From: freebsd@keybaud.org To: current@freebsd.org Subject: kernel panic with today's CURRENT on sparc64 at boot Message-ID: <20030121173342.GA15661@keybaud.org>
next in thread | raw e-mail | index | archive | help
Hi
cvsup'd to . today on an E220R, single CPU with two Symbios scsi cards.
Box had been running fine with RC3, but would not boot with -CURRENT
kernel:
Current:
hme4: Ethernet address: 08:00:20:b7:ef:44
miibus4: <MII bus> on hme4
ukphy3: <Generic IEEE 802.3u media interface> on miibus4
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x1000-0x10ff mem 0x1090a000-0x1090afff,0x10908000-0x109080ff i
rq 32 at device 3.0 on pci0
panic: trap: fast data access mmu miss
cpuid = 0;
Debugger("panic")
Stopped at Debugger+0x1c: ta %xcc, 1
RC3:
hme4: Ethernet address: 08:00:20:b7:ef:44
miibus4: <MII bus> on hme4
ukphy3: <Generic IEEE 802.3u media interface> on miibus4
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x1000-0x10ff mem 0x1090a000-0x1090afff,0x10908000-0x109080ff i
rq 32 at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x1400-0x14ff mem 0x1090e000-0x1090efff,0x1090c000-0x1090c0ff i
rq 38 at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib2: <PCI-PCI bridge> at device 4.0 on pci0
pci2: <PCI bus> on pcib2
Help! :)
Thanks
Steven
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030121173342.GA15661>