Date: Sat, 8 Feb 2003 17:55:43 -0800 From: Sam Tannous <stannous@employees.org> To: freebsd-mobile@freebsd.org Subject: Netgear MA301 wireless adapter problems (in current and stable) Message-ID: <20030209015543.GA20705@cisco.com>
next in thread | raw e-mail | index | archive | help
I can't seem to get this Netgear MA301 wireless
adapter (bridge) recognized. I see the same problem
in both -current and stable. I tried putting
hw.pci.allow_unsupported_io_range='1' in /boot/loader.conf.
I've also made sure that PNP is off in BIOS (it's an
Intel motherboard). For FreeBSD 5.0 current, I'm
using pretty much a generic kernel config (cvsupped
today) so wi is alread enabled. Do I need to configure
this card with windows first?
---------------------------
eclipse# dmesg | grep wi0
wi0: <Netgear MA301> port 0x1080-0x10bf,0x1800-0x187f mem 0xf4209000-0xf4209fff irq 9 at device 16.0 on pci0
wi0: failed in wi_seek to fce0/0
wi0: mac read failed 5
device_probe_and_attach: wi0 attach returned 5
--------------------------------
eclipse# pciconf -lv
<snip>
none1@pci0:16:0: class=0x028000 card=0x41001385 chip=0x41001385 rev=0x02 hdr=0x00
vendor = 'Netgear'
device = 'MA301 802.11b Wireless Adapter'
class = network
-----------------------------------
Thanks,
--Sam
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030209015543.GA20705>