Date: Thu, 20 Feb 2003 08:19:05 -0800 From: "Kevin Oberman" <oberman@es.net> To: current@freebsd.org Subject: Ethernet (xl) will not transmit or receive Message-ID: <20030220161905.BBA6D5D04@ptavv.es.net>
next in thread | raw e-mail | index | archive | help
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
Ethernet which had been working fine on a kernel built in late
January.
The dmesg is not too meaningful, but the system shows no errors. It
simply never receives a packet. ARPs are all incomplete and no packets
are transmitted although netstat -in indicates that they are. The
packets never actually reach the wire, though.
I can't believe that no one else has this card, but I didn't find
anything in the archives on it.
Any idea what needs to be rolled back and how far? I'm suspicious that
it might be an mii problem. Maybe even an interrupt issue. I an
suspicious of the second, empty xlphy0: line in the dmesg, but the
reported MAC is right and my old kernel that works seems to generate a
similar empty line.
Any clues or suggestions appreciated.
Thanks,
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net Phone: +1 510 486-8634
--[[application/octet-stream
Content-Disposition: attachment; filename="dmesg.boot"][7bit]]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p1 #2: Wed Feb 19 22:47:50 PST 2003
root@kzin.es.net:/usr/obj/usr/src/sys/KZIN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04a00a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a00f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451024032 Hz
CPU: AMD-K6(tm) 3D+ Processor (451.02-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
real memory = 100646912 (95 MB)
avail memory = 92729344 (88 MB)
Initializing GEOMetry subsystem
K6-family MTRR support enabled (2 registers)
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P5A > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 8 entries at 0xc00f0ca0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <AudioPCI ES1373-8> port 0xd800-0xd83f irq 9 at device 9.0 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xde000000-0xde00007f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:50:da:80:4b:43
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd000-0xd00f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 13031MB <FUJITSU MPE3136AT> [26476/16/63] at ata0-master UDMA33
ad2: 13029MB <Maxtor 91366U4> [26473/16/63] at ata1-master UDMA33
acd0: CDROM <SONY CD-ROM CDU4821> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 1 lun 0
cd0: <SONY CD-ROM CDU4821 S0.M> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030220161905.BBA6D5D04>