Date: Mon, 28 Apr 2003 13:46:19 -0700 (PDT) From: Daryl Chance <chancedj@yahoo.com> To: current@freebsd.org Subject: dc0: failed to force tx and rx to idle state Message-ID: <20030428204619.76247.qmail@web9608.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
I was getting this message on my FBSD 5.0-RELEASE box
when transferring large amounts of files (like a cd's
worth of mp3's - it's an mp3 server). So I decided to
update the 5-CURRENT to help out with testing before
the 5.1 release and to see if the message goes away.
It's still there
I assume, from the little bit of research I've done on
this, that it's harmless, but annoying. Is this
something that you're wanting to fix before 5.1R? If
so, I won't mind helping locate it.
uname and dmesg output is below (I also get this
message about 4-5 times while just booting the
machine).
--uname out--
FreeBSD mp3.earthlink.net 5.0-CURRENT FreeBSD
5.0-CURRENT #0: Sun Apr 27 02:58:02 CDT 2003
root@mp3.earthlink.net:/usr/obj/usr/src/sys/MP3 i386
--dmesg out--
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Apr 27 02:58:02 CDT 2003
root@mp3.earthlink.net:/usr/obj/usr/src/sys/MP3
Preloaded elf kernel "/boot/kernel/kernel" at
0xc06f1000.
Preloaded elf module "/boot/kernel/acpi.ko" at
0xc06f10a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451024685 Hz
CPU: AMD-K6(tm) 3D+ Processor (451.02-MHz 586-class
CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 100597760 (95 MB)
avail memory = 90206208 (86 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SOYO AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to
GPE15
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fdcd0
acpi0: power button is handled as a fixed feature
programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x5008-0x500b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5080-0x50ff,0x5000-0x507f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem
0xd1000000-0xd13fffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586B UDMA33 controller> port
0xe000-0xe00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xe800-0xe8ff mem
0xd1400000-0xd14000ff irq 11 at device 10.0 on pci0
dc0: Ethernet address: 00:a0:cc:53:6e:57
miibus0: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%),
currently 100.0%
stray irq 7
ad0: 9765MB <Maxtor 91024D4> [19841/16/63] at
ata0-master UDMA33
ad2: 29333MB <WDC WD307AA-00BAA0> [59598/16/63] at
ata1-master UDMA33
stray irq 7
Mounting root from ufs:/dev/ad0s1a
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
...continues on and on...
Daryl
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030428204619.76247.qmail>