Date: Sun, 20 Jul 2003 19:29:25 +0700 From: "Bayu Krisna" <krisna@corebsd.or.id> To: freebsd-alpha@freebsd.org Subject: NewBie on alpha server. Message-ID: <20030720105809.M90282@corebsd.or.id>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Please help me.
Could anyone explain my DMESG, I'm using FreeBSD 4.8-RELEASE with 2 x 4GB and
1.5gb hardisk. All da0-da13 have same space. Where is my second 4 GB and 1.5
gb hardisk?
--
Timecounter "alpha" frequency 400000798 Hz
Waiting 15 seconds for SCSI devices to settle
isp0: SCSI phase skipped for target 0.4.0
isp0: SCSI phase skipped for target 0.1.0
--
When boot this part take a long time. more than 5-8 minutes. can anyone
explain me why?
Oke..
Thanks For Help.
[-- Attachment #2 --]
ffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 400002334 Hz
Waiting 15 seconds for SCSI devices to settle
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
da0 at isp0 bus 0 target 1 lun 0
da0: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da0: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da1 at isp0 bus 0 target 2 lun 0
da1: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da1: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da2 at isp0 bus 0 target 3 lun 0
da2: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da2: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da3 at isp0 bus 0 target 5 lun 0
da3: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da3: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da4 at isp0 bus 0 target 6 lun 0
da4: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da4: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da5 at isp0 bus 0 target 7 lun 0
da5: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da5: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da5: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da6 at isp0 bus 0 target 8 lun 0
da6: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da6: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da6: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da7 at isp0 bus 0 target 9 lun 0
da7: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da7: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da7: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da13 at isp0 bus 0 target 15 lun 0
da13: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da13: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da13: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da8 at isp0 bus 0 target 10 lun 0
da8: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da8: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da8: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da9 at isp0 bus 0 target 11 lun 0
da9: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da9: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da9: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da10 at isp0 bus 0 target 12 lun 0
da10: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da10: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da10: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da11 at isp0 bus 0 target 13 lun 0
da11: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da11: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da11: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da12 at isp0 bus 0 target 14 lun 0
da12: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da12: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da12: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
Mounting root from ufs:/dev/md0c
WARNING: clock gained 107 days -- CHECK AND RESET THE DATE!
module_register: module pci/if_txp already exists!
linker_file_sysinit "if_txp.ko" failed to register! 17
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 4
done
Uptime: 19m17s
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Fri Apr 4 03:45:38 GMT 2003
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 1000/1000A
AlphaServer 800 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000500020115
real memory = 266493952 (260248K bytes)
avail memory = 252485632 (246568K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007f8000.
md0: Malloc disk
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82850000-0x82850fff irq 0 at device 5.0 on pci0
isp0: interrupting at CIA irq 0
isp0: invalid NVRAM header
pci0: <S3 Trio graphics accelerator> at 6.0 irq 9
isab0: <Intel 82375EB PCI-EISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x10100-0x1013f mem 0x82800000-0x8281ffff,0x82851000-0x82851fff irq 5 at device 13.0 on pci0
fxp0: interrupting at CIA irq 5
fxp0: Ethernet address 00:02:b3:33:72:89
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 400002238 Hz
Waiting 15 seconds for SCSI devices to settle
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.0
isp0: bus reset destroyed command for 0.2.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
da0 at isp0 bus 0 target 1 lun 0
da0: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da0: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da1 at isp0 bus 0 target 2 lun 0
da1: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da1: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da2 at isp0 bus 0 target 3 lun 0
da2: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da2: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da3 at isp0 bus 0 target 5 lun 0
da3: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da3: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da4 at isp0 bus 0 target 6 lun 0
da4: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da4: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da5 at isp0 bus 0 target 7 lun 0
da5: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da5: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da5: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da6 at isp0 bus 0 target 8 lun 0
da6: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da6: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da6: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da7 at isp0 bus 0 target 9 lun 0
da7: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da7: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da7: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da8 at isp0 bus 0 target 10 lun 0
da8: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da8: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da8: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da9 at isp0 bus 0 target 11 lun 0
da9: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da9: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da9: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da10 at isp0 bus 0 target 12 lun 0
da10: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da10: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da10: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da12 at isp0 bus 0 target 14 lun 0
da12: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da12: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da12: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da13 at isp0 bus 0 target 15 lun 0
da13: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da13: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da13: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da11 at isp0 bus 0 target 13 lun 0
da11: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da11: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da11: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
Mounting root from ufs:/dev/da0a
logo_saver: no suitable graphics mode
module_register_init: MOD_LOAD (logo_saver, fffffe0000ea5160, 0) error 19
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 1
done
Uptime: 7m29s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Fri Apr 4 03:45:38 GMT 2003
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 1000/1000A
AlphaServer 800 5/400, 400MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000500020115
real memory = 266493952 (260248K bytes)
avail memory = 252485632 (246568K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007f8000.
md0: Malloc disk
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82850000-0x82850fff irq 0 at device 5.0 on pci0
isp0: interrupting at CIA irq 0
isp0: invalid NVRAM header
pci0: <S3 Trio graphics accelerator> at 6.0 irq 9
isab0: <Intel 82375EB PCI-EISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x10100-0x1013f mem 0x82800000-0x8281ffff,0x82851000-0x82851fff irq 5 at device 13.0 on pci0
fxp0: interrupting at CIA irq 5
fxp0: Ethernet address 00:02:b3:33:72:89
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 400000798 Hz
Waiting 15 seconds for SCSI devices to settle
isp0: SCSI phase skipped for target 0.4.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.0
isp0: SCSI phase skipped for target 0.1.1
isp0: SCSI phase skipped for target 0.1.1
isp0: SCSI phase skipped for target 0.1.1
isp0: SCSI phase skipped for target 0.1.1
isp0: SCSI phase skipped for target 0.1.1
isp0: SCSI phase skipped for target 0.1.2
isp0: SCSI phase skipped for target 0.1.4
isp0: SCSI phase skipped for target 0.1.4
isp0: SCSI phase skipped for target 0.1.4
isp0: SCSI phase skipped for target 0.1.4
isp0: SCSI phase skipped for target 0.1.5
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.1.5
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
isp0: bus reset destroyed command for 0.4.0
isp0: bus reset destroyed command for 0.3.0
isp0: bus reset destroyed command for 0.5.0
isp0: bus reset destroyed command for 0.6.0
isp0: bus reset destroyed command for 0.7.0
isp0: bus reset destroyed command for 0.8.0
isp0: bus reset destroyed command for 0.9.0
isp0: bus reset destroyed command for 0.10.0
isp0: bus reset destroyed command for 0.11.0
isp0: bus reset destroyed command for 0.12.0
isp0: bus reset destroyed command for 0.13.0
isp0: bus reset destroyed command for 0.14.0
isp0: bus reset destroyed command for 0.15.0
isp0: SCSI phase skipped for target 0.4.0
Mounting root from ufs:/dev/da0a
da2 at isp0 bus 0 target 3 lun 0
da2: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da2: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da2: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da3 at isp0 bus 0 target 5 lun 0
da3: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da3: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da3: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da4 at isp0 bus 0 target 6 lun 0
da4: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da4: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da4: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da5 at isp0 bus 0 target 7 lun 0
da5: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da5: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da5: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da6 at isp0 bus 0 target 8 lun 0
da6: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da6: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da6: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da7 at isp0 bus 0 target 9 lun 0
da7: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da7: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da7: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da8 at isp0 bus 0 target 10 lun 0
da8: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da8: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da8: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da9 at isp0 bus 0 target 11 lun 0
da9: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da9: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da9: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da10 at isp0 bus 0 target 12 lun 0
da10: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da10: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da10: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da12 at isp0 bus 0 target 14 lun 0
da12: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da12: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da12: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da13 at isp0 bus 0 target 15 lun 0
da13: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da13: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da13: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da11 at isp0 bus 0 target 13 lun 0
da11: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da11: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da11: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da0 at isp0 bus 0 target 1 lun 0
da0: <DEC RZ1CB-CA (C) DEC LYJ0> Fixed Direct Access SCSI-2 device
da0: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da1 at isp0 bus 0 target 2 lun 0
da1: <DEC RZ28M-S (C) DEC 4001> Fixed Direct Access SCSI-2 device
da1: 3.906MB/s transfers (1.953MHz, offset 12, 16bit), Tagged Queueing Enabled
da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030720105809.M90282>