Date: Fri, 1 Aug 2003 14:47:43 -0400 From: Jim Knoble <jmknoble+freebsd-mobile@pobox.com> To: freebsd-mobile@freebsd.org Subject: FBSD-5.1-RELEASE, Sony Vaio PCG-505TR, Linksys Combo (EC2T) PC-Card or Adaptec SlimSCSI 1460D PC-Card Message-ID: <20030801184743.GA27280@crawfish.ais.com>
next in thread | raw e-mail | index | archive | help
--n8g4imXOkfNTN/H1
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi, all. Trying to install FreeBSD-5.1 on a Sony Vaio PCG-505TR
(Pentium MMX 300MHz, 128MB RAM, external floppy, no CD-ROM, single Type
II PC-Card slot). Having trouble with the following:
(1) Net install using Linksys Combo EthernetCard (EC2T). This card
is detected by the ed driver (as ed1), but the card appears to
want IRQ 9, which doesn't work on this laptop. I've tried
setting a device hint ("set hints.ed.1.irq=3D11" in the
bootloader), but FreeBSD still gives it IRQ 9. How can i tell
FreeBSD to give it IRQ 11?
=20
Same thing goes for my Linksys EtherFast 10/100 PC-Card.
=20
(2) Failing that, i've got an external SCSI CD-ROM drive attached to
an Adaptec SlimSCSI 1460D. FreeBSD panics when it boots with the
card inserted, and it won't detect the card if it's not inserted
at boot. The kernel messages, including the (reproducible)
panic, are below.
=20
Both these installs are using kern.flp and mfsroot.flp from the
5.1-RELEASE ISO image. All three cards mentioned are 16-bit PC-Card,
not 32-bit CardBus.
Any ideas?
+--------
| Booting [/kernel]...
| Copyright (c) 1992-2003 The FreeBSD Project.
| Copyright (c) 1979 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
| The regents of the University of California. All rights reserved.
| FreeBSD 5.1-RELEASE #0: Thu Jun 5 03:08:07 GMT 2003
| root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS
| Preloaded elf kernel "/kernel" at 0xc07ec000.
| Preloaded mfs_root "/mfsroot" at 0xc07ec1d0.
| Timecounter "i8254" frequency 1193182 Hz
| Timecounter "TSC" frequency 298448421 Hz
| CPU: Pentium/P55C (quarter-micron) (298.45-MHz 586-class CPU)
| Origin =3D "GenuineIntel" Id =3D 0x582 Stepping =3D 2
| Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
| real memory =3D 134152192 (127 MB)
| avail memory =3D 121815040 (116 MB)
| Intel Pentium detected, installing workaround for F00F bug
| md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03b2cdc
| npx0: <math processor> on motherboard
| npx0: INT 16 interface
| pcibios: BIOS version 2.10
| Using $PIR table, 4 entries at 0xc00fdf80
| pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
| pci0: <PCI bus> on pcib0
| isab0: <PCI-ISA bridge> at device 7.0 on pci0
| isa0: <ISA bus> on isab0
| atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcd0-0xfcdf at device \
| 7.1 on pci0
| ata0: at 0x1f0 irq 14 on atapci0
| ata1: at 0x170 irq 15 on atapci0
| uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff \
| irq 9 at device 7.2 on pci0
| usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
| usb0: USB revision 1.0
| uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
| uhub0: 2 ports with 2 removable, self powered
| pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
| pci0: <display, VGA> at device 8.0 (no driver attached)
| pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
| cbb0: <RF5C475 PCI-CardBus Bridge> at device 10.0 on pci0
| cardbus0: <CardBus bus> on cbb0
| pccard0: <16-bit PCCard bus> on cbb0
| pci_cfgintr: 0:10 INTA routed to irq 9
| orm0: <Option ROM> at iomem 0xc0000-cxcbfff on isa0
| atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
| atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
| kbd0 at atkbd0
| psm0: <PS/2 Mouse irq 12 on atkbdc0
| psm0: model VersaPad, device ID 0
| fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port \
| 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
| fdc0: FIFO enabled, 8 bytes threshold
| fd0: <1440-KB 3.5" drive> on fdc0 drive 0
| ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
| ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
| ppbus0: <Parallel port bus> on ppc0
| sc0: <System console> at flags 0x100 on isa0
| sc0: VGA <16 virtual consoles, flags=3D0x300>
| sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
| sio0: type 16550A
| sio1 at port 0x2f8-0x2ff irq 3 on isa0
| sio1: type 16550A
| vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on \
| isa0
| unknown: <PNP0c02> can't assign resources (port)
| unknown: <PNP0303> can't assign resources (port)
| unknown: <PNP0700> can't assign resources (port)
| unknown: <PNP0400> can't assign resources (port)
| unknown: <PNP0501> can't assign resources (port)
| unknown: <ROK0010> can't assign resources (port)
| unknown: <PNP0f13> can't assign resources (irq)
| Timecounters tick every 10.000 msec
|=20
|=20
| Fatal trap 12: page fault while in kernel mode
| fault virtual address =3D 0xc902b000
| fault code =3D supervisor read, page not present
| instruction pointer =3D 0x8:0xc01c5f51
| stack pointer =3D 0x10:0xc90119ac
| frame pointer =3D 0x10:0xc9011be8
| code segment =3D base 0x0, limit 0xfffff, type 0x1b
| =3D DPL 0, pres 1 def32 1, gran 1
| processor eflags =3D interrupt enabled, resume, IOPL =3D 0
| current process =3D 6 (cbb0)
| trap number =3D 12
| panic: page fault
|=20
| syncing disks, buffers remaining...
| done
| Uptime: 1s
| Automatic reboot in 15 seconds - press a key on the console to abort
+--------
--=20
jim knoble | jmknoble+freebsd-mobile@pobox.com
(GnuPG fingerprint: 31C4:8AAC:F24E:A70C:4000::BBF4:289F:EAA8:1381:1491)
--n8g4imXOkfNTN/H1
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (OpenBSD)
Comment: See http://www.pobox.com/~jmknoble/keys/ for my public key.
iD8DBQE/KrXPKJ/qqBOBFJERAiJrAKCQEmHh+RawtiYJr5WtmQxqTOlLsQCfe8Ex
Un+65Ya9xLqfQO5XT8Ms16Y=
=v/HX
-----END PGP SIGNATURE-----
--n8g4imXOkfNTN/H1--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030801184743.GA27280>