Date: Fri, 29 Aug 2003 22:54:10 -0500 From: Chip Norkus <wd@arpa.com> To: current@freebsd.org Subject: aac related panics Message-ID: <200308292254.10897.wd@arpa.com>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_i/BU/Edoh0MxpGs Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi all, I've got a Dell Poweredge 2650 which I recently installed 5.1-R on. That worked fine, and so I did a cvsup to get to 5.1-C as of about noon today. When I rebooted with the new kernel my system paniced before even finishing the kernel boot with the following: command 0xca6df000 not in queue, flags = 0x20, bit = 0x80 panic: command not in queue cpuid = 0; 1apic.id = 00000000 then it tried to shutdown the aac0 controller which failed. I've attached my kernel config below. I've also tried it with a non-SMP kernel and had the same results. I haven't tried using DISABLE_PSE or DISBALE_PG_G, but I will do so in a bit and report back if my condition improves. My company is working on a new hosting infrastructure, and I'd like to use FreeBSD if possible, so any help at all would be greatly appreciated as we plan to use these machines for some time. -wd -- chip norkus; renaissance hacker; wd@arpa.com "question = (to) ? be : !be;" --Shakespeare http://telekinesis.org/ --Boundary-00=_i/BU/Edoh0MxpGs Content-Type: text/plain; charset="us-ascii"; name="dell2650" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dell2650" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.387 2003/08/24 09:30:13 sos Exp $ machine i386 cpu I686_CPU ident dell2650 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols makeoptions MODULES_OVERRIDE="acpi linux" options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as /, requires NFSCLIENT options CD9660 #ISO 9660 Filesystem #options PROCFS #Process filesystem (requires PSEUDOFS) #options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev # Debugging for use in -current options DDB #Enable the kernel debugger options DDB_UNATTENDED # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering # RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for options! device iir # Intel Integrated RAID device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Add suspend/resume support for the i8254. device pmtimer # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bge # Broadcom BCM570xx Gigabit Ethernet # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter --Boundary-00=_i/BU/Edoh0MxpGs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308292254.10897.wd>