Date: Thu, 25 Sep 2003 08:55:34 +0200 From: Anthony Stanton <anthony.stanton@es.easynet.net> To: Paul Saab <ps@mu.org> Cc: freebsd-scsi@freebsd.org Subject: Re: Problem with ciss(4) in production system Message-ID: <20030925065534.GC96998@es.easynet.net> In-Reply-To: <20030925001400.GA91560@elvis.mu.org> References: <20030924132038.GD94794@es.easynet.net> <20030925001400.GA91560@elvis.mu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Qxx1br4bt0+wmkIi Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit On Wed, Sep 24, 2003 at 05:14:00PM -0700, Paul Saab wrote: > dmesg from a boot verbose please. > Sorry, see the attached. -- Anthony Stanton +34 91 789 46 00 Systems Manager, Easynet Espaņa S.A.U. http://www.es.easynet.net/ --Qxx1br4bt0+wmkIi Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.yesterday" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Tue Aug 26 17:20:41 CEST 2003 ewen@brooklyn.mail.es.easynet.net:/usr/src/sys/compile/BROOKLYN Timecounter "i8254" frequency 1193182 Hz CPU: Intel Pentium III (863.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1207943168 (1179632K bytes) avail memory = 1170554880 (1143120K bytes) Changing APIC ID for IO APIC #0 from 0 to 8 on chip Programming 35 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0328000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 5 at device 1.0 on pci0 ida0: drives=1 firm_rev=1.50 idad0: <Compaq Logical Drive> on ida0 idad0: 17359MB (35553120 sectors), blocksize=512 pci0: <ATI Mach64-GV graphics accelerator> at 3.0 pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0 ciss0: <Compaq Smart Array 5300> port 0x2800-0x28ff mem 0xc3e00000-0xc3efffff,0xc3f80000-0xc3fbffff irq 3 at device 5.0 on pci0 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 2.92 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 0 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x20000059 ciss0: 1 logical drive ciss0: logical drive 1: RAID 5, 381952MB online isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2c00-0x2c0f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x303f mem 0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 7 at device 4.0 on pci3 fxp0: Ethernet address 00:02:a5:8a:83:c0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x3040-0x307f mem 0xc6c00000-0xc6cfffff,0xc6dff000-0xc6dfffff irq 10 at device 5.0 on pci3 fxp1: Ethernet address 00:02:a5:8a:83:bf inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto eisa0: <EISA bus> on motherboard mainboard0: <CPQ0685 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xe8000-0xedfff,0xee000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 ata1-slave: ATAPI identify retries exceeded SMP: AP CPU #1 Launched! acd0: CDROM <CD-224E> at ata1-master PIO4 Mounting root from ufs:/dev/idad0s1a da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 382045MB (782429760 512 byte sectors: 255H 63S/T 48704C) WARNING: / was not properly dismounted fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6 fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6 --Qxx1br4bt0+wmkIi--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030925065534.GC96998>