Date: Sat, 4 Oct 2003 07:29:45 -0400 From: hg@cally.queue.to To: freebsd-stable@freebsd.org Subject: Re: Frequent reboots... Message-ID: <20031004112945.67756.qmail@cally.queue.to> In-Reply-To: <20031003233557.50553.qmail@cally.queue.to> References: <20030930034849.GA46581@scylla.towardex.com> <20031003233557.50553.qmail@cally.queue.to>
next in thread | previous in thread | raw e-mail | index | archive | help
In mpc.lists.freebsd.stable, I wrote:
: In mpc.lists.freebsd.stable, you wrote:
: :
: : I am having a problem with a new server running FreeBSD 4.9-PRERELEASE.
: :
: : Once every two days or so, it reboots itself.. there is no exact time of the day it reboots..
: :
:
: I'm also seeing this disturbing new problem concurrent an install of
: 4.9-PRERELASE, have not suffered this problem throughout 3.1 and up
: through 4.8-RC1.
:
: my dmesg:
(please see <20031003233557.50553.qmail@cally.queue.to> for the dmesg
of the machine that's begun to reboot itself about once every day and
a half, all at difference times, a behavior that begun with moving it
from 4.8-RC1 to 4.9-PRERELEASE)
FWIW at the same time I installworlded that box I installworlded two
other machines up from 4.8-RC1 but those have remained stable for 5+
days without reboot. Their dmesgs follow. Would be happy to supply
additional diag outputs or try things if it might be helpful...
Stable machine #1:
pickle:/usr/home/hg$ dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #0: Sat Sep 27 20:09:47 EDT 2003
hg@cally.queue.to:/u2/usr/obj/usr/src/sys/PICKLE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K5(tm) Processor (99.72-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x511 Stepping = 1
Features=0x21bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE>
AMD Features=0x0
real memory = 67108864 (65536K bytes)
avail memory = 61624320 (60180K bytes)
Preloaded elf kernel "kernel" at 0xc03aa000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (ProLAN)> port 0x6100-0x611f irq 11 at device 18.0 on pci0
ed0: address 00:20:78:18:d8:98, type NE2000 (16 bit)
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> at 20.0 irq 9
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
ex0: <Intel Pro/10+> at port 0x320-0x32f irq 5 on isa0
ex0: Manual config, 16-bit bus, board id 0x203, stepping 0x0
ex0: Ethernet address 00:a0:c9:a6:6e:e3
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ad0: 1033MB <WDC AC31000F> [2100/16/63] at ata0-master PIO3
Mounting root from ufs:/dev/ad0s1a
module_register: module miibus/ukphy already exists!
linker_file_sysinit "miibus.ko" failed to register! 17
module_register: module pci/ed already exists!
linker_file_sysinit "if_ed.ko" failed to register! 17
And stable machine #2:
cally:~# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #0: Sat Sep 27 18:02:47 EDT 2003
hg@cally.queue.to:/u2/usr/obj/usr/src/sys/CALLY
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.90GHz (1894.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 268173312 (261888K bytes)
avail memory = 256602112 (250588K bytes)
Preloaded elf kernel "kernel" at 0xc0442000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00f2e50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82850 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0201 graphics accelerator> at 0.0 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xfeafe000-0xfeafefff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:03:47:d3:e1:38
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 9 at device 11.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcm0: <AudioPCI ES1373-8> port 0xde80-0xdebf irq 10 at device 12.0 on pci2
pcm0: <Cirrus Logic CS4297A AC97 Codec>
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, bus powered
uhid0: Saitek Saitek X45, rev 1.00/0.02, addr 3, iclass 3/0
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xefa0-0xefaf irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub3 attach returned 6
uhub3: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2
device_probe_and_attach: uhub3 attach returned 6
orm0: <Option ROMs> at iomem 0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd3fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
joy0 at port 0x201 on isa0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ad0: 16289MB <FUJITSU MPE3170AT> [33095/16/63] at ata0-master UDMA66
acd0: CD-RW <CR-48X9TE> at ata1-master PIO4
Waiting 4 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <HP T20 3.01> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM XP32275W LXY4> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 2170MB (4445380 512 byte sectors: 255H 63S/T 276C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM XP32275W LXY4> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2170MB (4445380 512 byte sectors: 255H 63S/T 276C)
da2 at ahc0 bus 0 target 3 lun 0
da2: <SEAGATE ST39175LW 0001> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s3a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031004112945.67756.qmail>