Date: Sat, 29 Nov 2003 14:07:32 +0100 (CET) From: Martin Blapp <mb@imp.ch> To: freebsd-current@freebsd.org Cc: soeren@freebsd.org Subject: Cdrecord broken with 5.2Beta and ATAPICAM Message-ID: <20031129140232.N16675@cvs.imp.ch>
next in thread | raw e-mail | index | archive | help
Hi all, Since the ATAnG commit I'm no longer able to burn any Cd's. 5.X, 5.1R did work. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 pregap1: -1 Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'QSI ' Identifikation : 'DVD/CDRW SBW-161' Revision : 'SX14' Device seems to be: Generic mmc2 DVD-ROM. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 450 MB padsize: 30 KB Total size: 517 MB (51:16.50) = 230738 sectors Lout start: 517 MB (51:18/38) = 230738 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 129111 Starting to write CD/DVD at speed 16 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. cdrecord: WARNING: Drive returns wrong startsec (0) using -150 BURN-Free is ON. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error write track pad data: error after 0 bytes CDB: 2A 00 FF FF FF 6A 00 00 1F 00 BFree: 1568 K BSize: 1568 K status: 0x2 (CHECK CONDITION) Starting new track at sector: 0 Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 1.675s timeout 200s cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.192s timeout 200s Martin Martin Blapp, <mb@imp.ch> <mbr@FreeBSD.org> ------------------------------------------------------------------ ImproWare AG, UNIXSP & ISP, Zurlindenstrasse 29, 4133 Pratteln, CH Phone: +41 61 826 93 00 Fax: +41 61 826 93 01 PGP: <finger -l mbr@freebsd.org> PGP Fingerprint: B434 53FC C87C FE7B 0A18 B84C 8686 EF22 D300 551E ------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031129140232.N16675>