Date: Mon, 9 Feb 2004 11:51:40 -0800 (PST) From: Doug White <dwhite@gumbysoft.com> To: Sven Willenberger <sven@dmv.com> Cc: freebsd-current@freebsd.org Subject: Re: 5.2 Install CD doesn't detect all scsi drives Message-ID: <20040209114753.L48001@carver.gumbysoft.com> In-Reply-To: <1076338994.19845.10.camel@lanshark.dmv.com> References: <1076192961.18071.10.camel@lanshark.dmv.com> <1076338994.19845.10.camel@lanshark.dmv.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Try this. At the sysinstall menu, hit scroll lock, then arrow up and check out the asr probe messages. It'd be extra neat if you could capture them with a serial console. Next, hit scroll lock to get the screen back, then go to Fixit, then Shell. Run '/stand/camcontrol devlist -v' and paste us the output. That should show the two disk devices. Why it can't open the device is curious, and better yet is the bug where sysinstall doesn't print errno. :-) On Mon, 9 Feb 2004, Sven Willenberger wrote: > On Sat, 2004-02-07 at 17:29, Sven Willenberger wrote: > > Using a zero-channel adaptec 2010s (U320) RAID card with the following > > setup: > > > > Bus 0: single IBM U320 36GB drive > > Bus 1: three Seagate U320 72GB drives set up as RAID 5 > > > > (Where Bus corresponds to the SCSI channel on the Mobo - Supermicro) > > > > Booting from the 5.2-Release CD and during setup, the disk partition > > utility only sees the RAID configuration and not the one drive. The idea > > was to install the system, etc on the lone drive and the large RAID was > > to be used for a data spool. I have tried various configs with the > > adaptec SMOR to no avail. > > > > It turns out that the FreeBSD 4.9-Stable install cd correctly identifies > the single drive as da0 and the RAID as da1 and allows for separate > configuration of each, so at least I will be able to use this box with > FreeBSD :-) .... It would be nice to use 5.2 (and eventually 5.3 with > the new threading) however, and I am curious as to what changed between > 4 and 5 that is preventing 5 from properly recognizing this particular > setup. > > Enabling boot logging reveals the following: > DEBUG: deviceTry: attempting to open /dev/da0 > DEBUG: deviceTry: open of /dev/da0 succeeded on first try > DEBUG: deviceTry: attempting to open /dev/da1 > DEBUG: deviceTry: making raw device for /dev/da1 [13,65546] > DEBUG: deviceTry: final attempt for /mnt/dev/da1 returns -1 > > This occurs with 5.2.1-RC install CD as well > > Sven > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040209114753.L48001>