Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 Feb 2004 09:38:19 +0100
From:      Christophe Prevotaux <c.prevotaux@hexanet.fr>
To:        freebsd-stable@freebsd.org
Subject:   Re: Via Epia CL10000 and VIA C3
Message-ID:  <20040220093819.6050a0d2.c.prevotaux@hexanet.fr>
In-Reply-To: <40350580.2070707@natzo.com>
References:  <20040219102151.181c6b14.c.prevotaux@hexanet.fr> <40350580.2070707@natzo.com>

next in thread | previous in thread | raw e-mail | index | archive | help

Thanks for the answer

In fact I am planning to use it as a router and firewall
plus I'd like to run quite a few IPSEC Tunnel at speed
between 2Mbps to 80Mbps , I also need use a HiFn card
or possible some Intel NICs with 3DES support.


On Thu, 19 Feb 2004 13:50:40 -0500
Dany Nativel <dany_list@natzo.com> wrote:

> My fileserver is running on a M6000 (pre-CL10000) using FreeBSD 5.2
> 
> I had some troubles compiling the kernel. The trick was to use :
> 
> - i686 in the kernel config
> - i586 in the make file   (full 686 compilation cannot be used due to
> a missing instruction)
> 
> But in your case I think you processor supports 686 for the
> compilation.
> 
> You shouldn't have a problem with 4.9 due to the older gcc (less 
> options) as far as compilation goes. Now you should check if the
> network interface is supported.
> 
> I forgot, are you planning to run X on it ?  I didn't hear a lot of
> good thing regarding XFree86 support on the CLE266.
> 
> Hope this will help.
> Dany
> 
> Christophe Prevotaux wrote:
> 
> >Hello,
> >
> >I would like to know if FreeBSD 4-STABLE (or 4.9 Release) supports
> >the Via Epia CL10000 Motherboard and CPU VIA C3 1Ghz ? 
> >
> >_______________________________________________
> >freebsd-stable@freebsd.org mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >To unsubscribe, send any mail to
> >"freebsd-stable-unsubscribe@freebsd.org"
> >  
> >
> 
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
> "freebsd-stable-unsubscribe@freebsd.org"
> 


--
===============================================================
Christophe Prevotaux      Email: c.prevotaux@hexanet.fr
HEXANET SARL                URL: http://www.hexanet.fr/
Z.A.C Les Charmilles        Tel: +33 (0)3 26 79 30 05 
3 Allée Thierry Sabine   Direct: +33 (0)3 26 61 77 72 
BP202                       Fax: +33 (0)3 26 79 30 06
51686 Reims Cedex 2 		                   
FRANCE                   HEXANET Network Operation Center             
===============================================================



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040220093819.6050a0d2.c.prevotaux>