Date: Wed, 10 Mar 2004 21:59:16 -0800 (PST) From: Nate Lawson <nate@root.org> To: Niraj Kumar <niraj17@iitbombay.org> Cc: current@freebsd.org Subject: Re: 5.2.1 : general protection fault without ACPI Message-ID: <20040310215648.K62367@root.org> In-Reply-To: <404FF8E3.2040405@iitbombay.org> References: <20040310205236.P62145@root.org> <404FF8E3.2040405@iitbombay.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Nate Lawson wrote: > > >You might want to try booting with device apic disabled. Also, can you > >send me a link to your ASL? > > > > acpidump -t -d > niraj.asl > > > >The ACPI debugging section of the handbook suggests this: > >http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html > > > On Thu, 11 Mar 2004, Niraj Kumar wrote: > Well , actually I had added this line to device conf file: > hint.apic.0.disabled=``1' > and booted , but I got the same crash (general protection fault) . > So my system became unbootable after this point. > > I had to reboot into Linux and enable ufs support and then mount the > freebsd root partition and > remove that line before my system got bootable again . > > I think the issue here is that I should atleast be able to boot without > ACPI . > > Anyway I will try to get that acpidump and post it . Please don't top post. You don't have to add things to the loader.conf file, you can manually do them at boot time with the "set" command at the loader prompt. My laptop used to boot fine without ACPI and now no longer boots without it. It hangs halfway through the boot sequence. I haven't had time to track it down. Some laptops cannot boot at all without ACPI. In the future, PC vendors will not make ACPI optional. I want the acpidump to look into the ATA irq routing warnings, not sure about the GPF you mentioned. Hopefully someone else can look at this. -Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040310215648.K62367>