Date: Thu, 6 May 2004 10:30:33 -0700 From: Kent Stewart <kstewart@owt.com> To: freebsd-questions@freebsd.org Cc: Ewald Jenisch <a@jenisch.at> Subject: Re: Stop. in installworld (4.9) Message-ID: <200405061030.33800.kstewart@owt.com> In-Reply-To: <20040506164535.GC4351@athena.oekb.co.at> References: <20040506164535.GC4351@athena.oekb.co.at>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 06 May 2004 09:45 am, Ewald Jenisch wrote:
> Hi,
>
> Upon trying to upgrade a 4.9 system to the most recent version I
> ended up with a "Stop." during "make installworld".
When ever touch gets involved in an installworld, your computer's clock
is usually off and make thinks it needs to recreate something. Set the
clock to the proper time and rebuild your world and then try the
install.
Kent
>
> Here's what I did:
>
> cvsup ... stable-supfile
> cd /usr/src
> make buildworld
> make buildkernel KERNCONF=... (Kernel-config-file below)
> make installkernel KERNCONF=...
> reboot to single-mode (no errors booting with the new kernel)
> mergemaster -p
> cd /usr/src
> make installworld
>
> Installworld ends with a "Stop." (see below).
>
> Anybody else already seen this?
>
> What can I do against it?
>
> BTW, cvsup-ing again about an hour later didn't help.
>
> TIA for your help,
> -ewald
>
> PS: I'm including the full text of the error message as well as my
> kernel config and the /var/log/messages below.
>
> ------------------------------ < Cut here >
> ------------------------------
>
> # cd /usr/src
> # make installworld
> mkdir -p /tmp/install.42
> for prog in [ awk cap_mkdb cat chflags chmod chown date echo egrep
> find grep ln make makewhatis mkdir mtree mv pwd_mkdb rm sed sh
> sysctl test true uname wc zic; do cp `which $prog` /tmp/install.42;
> done cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=i386
> MACHINE=i386 OBJFORMAT_PATH=/usr/obj/usr/src/i386/usr/libexec
> GROFF_BIN_PATH=/usr/obj/usr/src/i386/usr/bin
> GROFF_FONT_PATH=/usr/obj/usr/src/i386/usr/share/groff_font
> GROFF_TMAC_PATH=/usr/obj/usr/src/i386/usr/share/tmac
> PERL5LIB=/usr/obj/usr/src/i386/usr/libdata/perl/5.00503
> PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/us
>r/obj/usr/src/i386/usr/games:/tmp/install.42 make -f Makefile.inc1
> reinstall
> --------------------------------------------------------------
>
> >>> Making hierarchy
>
> --------------------------------------------------------------
> cd /usr/src; make -f Makefile.inc1 hierarchy
> cd /usr/src/etc; make distrib-dirs
> set - `grep "^[a-zA-Z]" /usr/src/etc/locale.deprecated`; while [ $#
> -gt 0 ] ; do for dir in /usr/share/locale /usr/share/nls
> /usr/local/share/nls; do test -d /${dir} && cd /${dir}; test -L
> "$2" && rm -rf "$2"; test \! -L "$1" && test -d "$1" && mv "$1"
> "$2"; done; shift; shift; done mtree -deU -f
> /usr/src/etc/mtree/BSD.root.dist -p /
> mtree -deU -f /usr/src/etc/mtree/BSD.var.dist -p /var
> mtree -deU -f /usr/src/etc/mtree/BSD.usr.dist -p /usr
> mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p /usr/include
> mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p
> /usr/libdata/perl/5.00503/mach mtree -deU -f
> /usr/src/etc/mtree/BSD.sendmail.dist -p /
> cd /; rm -f /sys; ln -s usr/src/sys sys
> cd /usr/share/man/en.ISO8859-1; ln -sf ../man* .
> cd /usr/share/man; set - `grep "^[a-zA-Z]" /usr/src/etc/man.alias`;
> while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift;
> shift; done cd /usr/share/locale; set - `grep "^[a-zA-Z]"
> /usr/src/etc/locale.alias`; while [ $# -gt 0 ] ; do rm -rf "$1";
> ln -s "$2" "$1"; shift; shift; done cd
> /usr/share/openssl/man/en.ISO8859-1; ln -sf ../man* .
> cd /usr/share/nls; set - `grep "^[a-zA-Z]" /usr/src/etc/nls.alias`;
> while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift;
> shift; done
>
> --------------------------------------------------------------
>
> >>> Installing everything..
>
> --------------------------------------------------------------
> cd /usr/src; make -f Makefile.inc1 install
> ===> share/info
> ===> include
> creating osreldate.h from newvers.sh
> setvar PARAMFILE /usr/src/include/../sys/sys/param.h; .
> /usr/src/include/../sys/conf/newvers.sh; echo "$COPYRIGHT" >
> osreldate.h; echo "#ifdef _KERNEL" >> osreldate.h; echo '#error
> "osreldate.h must not be used in the kernel, use sys/param.h"' >>
> osreldate.h; echo "#else" >> osreldate.h; echo \#'undef
> __FreeBSD_version' >> osreldate.h; echo \#'define __FreeBSD_version'
> $RELDATE >> osreldate.h; echo "#endif" >> osreldate.h touch: not
> found
> *** Error code 127
>
> Stop in /usr/src/include.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> # exit
>
> Script done on Wed Jan 28 04:57:15 2004
>
> ------------------------------ < Cut here >
> ------------------------------
>
> Kernel-config-file:
>
>
> machine i386
> # cpu I386_CPU
> # cpu I486_CPU
> # cpu I586_CPU
> cpu I686_CPU
> ident EJ
> maxusers 0
>
> #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
> options MATH_EMULATE #Support for x87 emulation
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device [keep this!]
> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_DIRHASH #Improve performance on big directories
> options MFS #Memory Filesystem
> options MD_ROOT #MD is a potential root device
> options NFS #Network Filesystem
> options NFS_ROOT #NFS usable as root device, NFS required
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options CD9660_ROOT #CD-ROM usable as root, CD9660 required
> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options UCONSOLE #Allow users to grab the console
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time extensions
> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
>
> # To make an SMP kernel, the next two are needed
> options SMP # Symmetric MultiProcessor Kernel
> options APIC_IO # Symmetric (APIC) I/O
>
> device isa
> device eisa
> device pci
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
> device fd1 at fdc0 drive 1
> #
> # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
> # don't use the above line for fdc0 but the following one:
> #device fdc0
>
> # ATA and ATAPI devices
> device ata0 at isa? port IO_WD1 irq 14
> device ata1 at isa? port IO_WD2 irq 15
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI Controllers
> device ahb # EISA AHA1742 family
> device ahc # AHA2940 and onboard AIC7xxx devices
> device ahd # AHA39320/29320 and onboard AIC79xx devices
> device amd # AMD 53C974 (Tekram DC-390(T))
> device isp # Qlogic family
> device mpt # LSI-Logic MPT/Fusion
> device ncr # NCR/Symbios Logic
> device sym # NCR/Symbios Logic (newer chipsets)
> options SYM_SETUP_LP_PROBE_MAP=0x40
> # Allow ncr to attach legacy NCR devices when
> # both sym and ncr are configured
>
> device adv0 at isa?
> device adw
> device bt0 at isa?
> device aha0 at isa?
> device aic0 at isa?
>
> device ncv # NCR 53C500
> device nsp # Workbit Ninja SCSI-3
> device stg # TMC 18C30/18C50
>
> # SCSI peripherals
> device scbus # SCSI bus (required)
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
>
> # RAID controllers interfaced to the SCSI subsystem
> device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
> device dpt # DPT Smartcache - See LINT for options!
> device iir # Intel Integrated RAID
> device mly # Mylex AcceleRAID/eXtremeRAID
> device ciss # Compaq SmartRAID 5* series
> device twa # 3ware 9000 series PATA/SATA RAID
>
> # RAID controllers
> device aac # Adaptec FSA RAID, Dell PERC2/PERC3
> #device aacp # SCSI passthrough for aac (requires CAM)
> device ida # Compaq Smart RAID
> device amr # AMI MegaRAID
> device mlx # Mylex DAC960 family
> device pst # Promise Supertrak SX6000
> device twe # 3ware Escalade
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1 flags 0x1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa?
>
> # splash screen/screen saver
> pseudo-device splash
>
> # syscons is the default console driver, resembling an SCO console
> device sc0 at isa? flags 0x100
>
> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console
> driver #device vt0 at isa?
> #options XSERVER # support for X server on a vt console
> #options FAT_CURSOR # start with block cursor
> # If you have a ThinkPAD, uncomment this along with the rest of the
> PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std
>
> device agp # support several AGP chipsets
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> device apm0 at nexus? disable flags 0x20 # Advanced Power Management
>
> # PCCARD (PCMCIA) support
> device card
> device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
> device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
> device sio2 at isa? disable port IO_COM3 irq 5
> device sio3 at isa? disable port IO_COM4 irq 9
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
> #device vpo # Requires scbus and da
>
>
> # PCI Ethernet NICs.
> device de # DEC/Intel DC21x4x (``Tulip'')
> device em # Intel PRO/1000 adapter Gigabit Ethernet Card
> (``Wiseman'') device txp # 3Com 3cR990 (``Typhoon'')
> device vx # 3Com 3c590, 3c595 (``Vortex'')
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use
> these NICs! device miibus # MII bus support
> device dc # DEC/Intel 21143 and various workalikes
> device fxp # Intel EtherExpress PRO/100B (82557, 82558)
> device pcn # AMD Am79C97x PCI 10/100 NICs
> device rl # RealTek 8129/8139
> device sf # Adaptec AIC-6915 (``Starfire'')
> device sis # Silicon Integrated Systems SiS 900/SiS 7016
> device ste # Sundance ST201 (D-Link DFE-550TX)
> device tl # Texas Instruments ThunderLAN
> device tx # SMC EtherPower II (83c170 ``EPIC'')
> device vr # VIA Rhine, Rhine II
> device wb # Winbond W89C840F
> device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
> device bge # Broadcom BCM570x (``Tigon III'')
>
> # ISA Ethernet NICs.
> # 'device ed' requires 'device miibus'
> device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
> device ex
> device ep
> device fe0 at isa? disable port 0x300
> # Xircom Ethernet
> device xe
> # PRISM I IEEE 802.11b wireless NIC.
> device awi
> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
> # exists only as a PCMCIA device, so there is no ISA attachment
> needed # and resources will always be dynamically assigned by the
> pccard code. device wi
> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below
> will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA
> PnP # mode (the factory default). If you set the switches on your ISA
> # card for a manually chosen I/O address and IRQ, you must specify #
> those parameters here.
> device an
> # The probe order of these is presently determined by
> i386/isa/isa_compat.c. device ie0 at isa? disable port 0x300 irq 10
> iomem 0xd0000
> #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
> device lnc0 at isa? disable port 0x280 irq 10 drq 0
> device cs0 at isa? disable port 0x300
> device sn0 at isa? disable port 0x300 irq 10
>
> # Pseudo devices - the number indicates how many units to allocate.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device sl 1 # Kernel SLIP
> pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> pseudo-device md # Memory "disks"
> pseudo-device gif # IPv6 and IPv4 tunneling
> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device bpf #Berkeley packet filter
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device uscanner # Scanners
> device urio # Diamond Rio MP3 Player
> # USB Ethernet, requires mii
> device aue # ADMtek USB ethernet
> device cue # CATC USB ethernet
> device kue # Kawasaki LSI USB ethernet
>
> # FireWire support
> device firewire # FireWire bus code
> device sbp # SCSI over FireWire (Requires scbus and da)
> device fwe # Ethernet over FireWire (non-standard!)
>
> ------------------------------ < Cut here >
> ------------------------------
>
> Jan 28 03:57:32 io /kernel: 0x000f0011, at 0xfec02000
> Jan 28 03:57:32 io /kernel: io3 (APIC): apic id: 5, version:
> 0x000f0011, at 0xfec03000 Jan 28 03:57:32 io /kernel: Preloaded elf
> kernel "kernel" at 0xc0561000. Jan 28 03:57:32 io /kernel: Warning:
> Pentium 4 CPU: PSE disabled Jan 28 03:57:32 io /kernel: Pentium Pro
> MTRR support enabled Jan 28 03:57:32 io /kernel: md0: Malloc disk
> Jan 28 03:57:32 io /kernel: npx0: <math processor> on motherboard
> Jan 28 03:57:32 io /kernel: npx0: INT 16 interface
> Jan 28 03:57:33 io /kernel: pcib0: <Host to PCI bridge> on
> motherboard Jan 28 03:57:33 io /kernel: pci0: <PCI bus> on pcib0
> Jan 28 03:57:33 io /kernel: pci0: <ATI Mach64-GR graphics
> accelerator> at 3.0 Jan 28 03:57:33 io /kernel: ciss0: <Compaq Smart
> Array 5i> port 0x2800-0x28ff mem
> 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 3 at device 4.0 on
> pci0 Jan 28 03:57:33 io /kernel: pci0: <unknown card> (vendor=0x0e11,
> dev=0xb203) at 5.0 irq 5 Jan 28 03:57:33 io /kernel: pci0: <unknown
> card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 7 Jan 28 03:57:33 io
> /kernel: isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at
> device 15.0 on pci0 Jan 28 03:57:33 io /kernel: isa0: <ISA bus> on
> isab0
> Jan 28 03:57:33 io /kernel: atapci0: <ServerWorks CSB5 ATA100
> controller> port
> 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
> device 15.1 on pci0 Jan 28 03:57:33 io /kernel: ata0: at 0x1f0 irq 14
> on atapci0 Jan 28 03:57:33 io /kernel: ata1: at 0x170 irq 15 on
> atapci0 Jan 28 03:57:33 io /kernel: ohci0: <OHCI (generic) USB
> controller> mem 0xf5e70000-0xf5e70fff irq 10 at device 15.2 on pci0
> Jan 28 03:57:33 io /kernel: usb0: OHCI version 1.0, legacy support
> Jan 28 03:57:33 io /kernel: usb0: SMM does not respond, resetting Jan
> 28 03:57:33 io /kernel: usb0: <OHCI (generic) USB controller> on
> ohci0 Jan 28 03:57:33 io /kernel: usb0: USB revision 1.0
> Jan 28 03:57:33 io /kernel: uhub0: (0x1166) OHCI root hub, class 9/0,
> rev 1.00/1.00, addr 1 Jan 28 03:57:33 io /kernel: uhub0: 4 ports with
> 4 removable, self powered Jan 28 03:57:33 io /kernel: pcib1: <Host to
> PCI bridge> on motherboard Jan 28 03:57:33 io /kernel: pci1: <PCI
> bus> on pcib1
> Jan 28 03:57:33 io /kernel: bge0: <Broadcom BCM5703 Gigabit Ethernet,
> ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 11 at device 2.0 on
> pci1 Jan 28 03:57:33 io /kernel: bge0: Ethernet address:
> 00:0f:20:79:1c:c3 Jan 28 03:57:33 io /kernel: miibus0: <MII bus> on
> bge0
> Jan 28 03:57:33 io /kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY>
> on miibus0 Jan 28 03:57:33 io /kernel: brgphy0: 10baseT,
> 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX,
> auto Jan 28 03:57:33 io /kernel: pcib2: <Host to PCI bridge> on
> motherboard Jan 28 03:57:33 io /kernel: pci2: <PCI bus> on pcib2
> Jan 28 03:57:33 io /kernel: pcib3: <Host to PCI bridge> on
> motherboard Jan 28 03:57:33 io /kernel: pci3: <PCI bus> on pcib3
> Jan 28 03:57:33 io /kernel: pcib4: <ServerWorks host to PCI
> bridge(unknown chipset)> on motherboard Jan 28 03:57:33 io /kernel:
> pci4: <PCI bus> on pcib4
> Jan 28 03:57:33 io /kernel: bge1: <Broadcom BCM5703 Gigabit Ethernet,
> ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 15 at device 2.0 on
> pci4 Jan 28 03:57:33 io /kernel: bge1: Ethernet address:
> 00:0f:20:79:1c:c5 Jan 28 03:57:33 io /kernel: miibus1: <MII bus> on
> bge1
> Jan 28 03:57:33 io /kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY>
> on miibus1 Jan 28 03:57:33 io /kernel: brgphy1: 10baseT,
> 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX,
> auto Jan 28 03:57:33 io /kernel: pcib5: <ServerWorks host to PCI
> bridge(unknown chipset)> on motherboard Jan 28 03:57:33 io /kernel:
> pci5: <PCI bus> on pcib5
> Jan 28 03:57:33 io /kernel: eisa0: <EISA bus> on motherboard
> Jan 28 03:57:33 io /kernel: mainboard0: <CPQ0733 (System Board)> on
> eisa0 slot 0 Jan 28 03:57:33 io /kernel: eisa0: unknown card AHC0000
> (0x05030000) at slot 2 Jan 28 03:57:33 io /kernel: orm0: <Option
> ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on
> isa0 Jan 28 03:57:33 io /kernel: pmtimer0 on isa0
> Jan 28 03:57:33 io /kernel: fdc0: <NEC 72065B or clone> at port
> 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jan 28 03:57:33 io /kernel:
> fdc0: FIFO enabled, 8 bytes threshold Jan 28 03:57:33 io /kernel:
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Jan 28 03:57:33 io /kernel:
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jan
> 28 03:57:33 io /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on
> atkbdc0 Jan 28 03:57:33 io /kernel: kbd0 at atkbd0
> Jan 28 03:57:33 io /kernel: vga0: <Generic ISA VGA> at port
> 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jan 28 03:57:33 io /kernel:
> sc0: <System console> at flags 0x100 on isa0 Jan 28 03:57:33 io
> /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jan 28 03:57:33
> io /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jan 28
> 03:57:33 io /kernel: sio0: type 16550A
> Jan 28 03:57:33 io /kernel: sio1: configured irq 3 not in bitmap of
> probed irqs 0 Jan 28 03:57:33 io /kernel: ppc0: parallel port not
> found.
> Jan 28 03:57:33 io /kernel: APIC_IO: Testing 8254 interrupt delivery
> Jan 28 03:57:33 io /kernel: APIC_IO: routing 8254 via IOAPIC #0
> intpin 2 Jan 28 03:57:33 io /kernel: SMP: AP CPU #3 Launched!
> Jan 28 03:57:33 io /kernel: SMP: AP CPU #1 Launched!
> Jan 28 03:57:33 io /kernel: SMP: AP CPU #2 Launched!
> Jan 28 03:57:33 io /kernel: acd0: CDROM <CRN-8245B> at ata0-master
> PIO4 Jan 28 03:57:33 io /kernel: Mounting root from ufs:/dev/da0s1a
> Jan 28 03:57:33 io /kernel: da0 at ciss0 bus 0 target 0 lun 0 Jan 28
> 03:57:33 io /kernel: da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct
> Access SCSI-0 device Jan 28 03:57:33 io /kernel: da0: 135.168MB/s
> transfers
> Jan 28 03:57:33 io /kernel: da0: 140006MB (286734240 512 byte
> sectors: 255H 32S/T 35139C) Jan 28 03:57:33 io /kernel:
> libio/PlotFile.h /usr/src
> Jan 28 03:57:33 io /kernel: sr/src/gnu/lib/libstdc++/
> Jan 28 03:57:33 io /kernel: stdc++/stl/set.h /usr/src
> Jan 28 03:57:33 io /kernel: ./../../contrib/libstdc++
> Jan 28 03:58:15 io su: ej to root on /dev/ttyp0
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe@freebsd.org"
--
Kent Stewart
Richland, WA
http://users.owt.com/kstewart/index.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200405061030.33800.kstewart>