Date: Fri, 20 Aug 2004 10:20:59 +0400 From: Sergei Kolobov <sergei@FreeBSD.org> To: John Baldwin <jhb@FreeBSD.org> Cc: freebsd-qa@FreeBSD.org Subject: Re: kern/47451: 5.0 GENERIC(sysinstall CD) locks during boot onProliant ML530 Message-ID: <20040820062059.GC42719@globcon.net> In-Reply-To: <200408181533.33980.jhb@FreeBSD.org> References: <200408181610.i7IGASqu040047@freefall.freebsd.org> <200408181533.33980.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2004-08-18 at 15:33 -0400, John Baldwin wrote: > On Wednesday 18 August 2004 12:10 pm, Sergei Kolobov wrote: > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0-0x1f at device > > 20.2 on pci0 pcib0: unable to route slot 20 INTD > > uhci0: Could not allocate irq > > device_probe_and_attach: uhci0 attach returned 6 > > This might be indicative of the problem. Can you try the following tweaks to > the BIOS setup: > > 1) Ensure that PnP OS is set to "no" The closest equivalent I could find for this is "Primary Operating System: Other". Remember - this is Compaq hardware, and they have nothing even distantly resembling "normal" Award/Phoenix BIOS. Instead, you have to use that (EISA) System Configuration Utility from the System Partition or SmartStart CD-ROM. > 2) If there are settings related to the MPTable that say something like "full > table" or "shortened table" try using the "full table" option. Nothing like that was found. > 3) Enable USB in the BIOS if it is disabled. There no USB-related option at all. In fact, there are *NO* USB ports in this server (it is circa '98-99). Isn't it funny the kernel found some USB controller, is it? Believe it or not, but I was finally able to install 5.2.1 on this hardware. After you mentioned that USB might be causing this, I have compiled a custom kernel on another 5.x machine (which happened to be my laptop running a recent -CURRENT) and put it on the kernel floppy, replacing GENERIC in kernel.gz. Voila - it booted without a problem, and I was able to use sysinstall on regular console (as opposed to serial console I had to use to capture the previous boot log). What I still do not understand - why then it would boot the same GENERIC kernel without a problem when the system was already installed? What is the difference between the boot process for install CD/floppy and the installed system? Sergei
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040820062059.GC42719>