Date: Sun, 12 Sep 2004 08:28:43 -0400 From: Tony Holmes <tony@crosswinds.net> To: freebsd-hardware@freebsd.org Subject: Re: Asus A7N8X-E w/SATA and SCSI, 4.10 sys install snafu Message-ID: <20040912122843.GA7321@crosswinds.net> In-Reply-To: <41438D6A.9000603@dreamchaser.org> References: <41438D6A.9000603@dreamchaser.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On +Sep 11, Gary Aitken wrote: > The BIOS reported devices and FreeBSD 4.10 boot probe (see below), > show the scsi device (pci1 at 6.0, irq11), but fbsd doesn't recognize it. > > Freebsd isn't recognizing > the buslogic controller (bt0) device (pci1, device 6.0), > the sata device (pci1 device 11.0), > or either of the network devices (pci0 device 4.0, pci1 device 4.0). I can chime in with a "me too" here, but with an Adaptec 29160 and Promise SATA controller. I successfully installed 4.9-RELEASE on a system. I later cvsup'd to 4.10-Stable and the SCSI isn't seen at all. BIOS probes it, but FreeBSD does not - appears to be a serious regression (which was reported to -scsi but no response). For me the boot would hang at the "Resetting SCSI" stage of the boot and not continue. Oddly, if I use an older 2940, it is recognized and the boot continues. If the SATA card is in the system, neither will boot. -- Tony Holmes Ph: (416) 993-1219 Founder and Senior Systems Architect Crosswinds Internet Communications Inc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040912122843.GA7321>