Date: Tue, 12 Apr 2005 23:27:18 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: Wilko Bulte <wb@freebie.xs4all.nl> Cc: freebsd-alpha@freebsd.org Subject: Re: MiataGL doesn't boot in 5.4-RC2 Message-ID: <20050412212717.GF40828@cicely12.cicely.de> In-Reply-To: <20050412210655.GA5737@freebie.xs4all.nl> References: <20050412201350.GD602@pato.euesrg02.net> <20050412205104.GE40828@cicely12.cicely.de> <20050412210655.GA5737@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 12, 2005 at 11:06:55PM +0200, Wilko Bulte wrote: > On Tue, Apr 12, 2005 at 10:51:05PM +0200, Bernd Walter wrote.. > > On Tue, Apr 12, 2005 at 10:13:50PM +0200, Victor Balada Diaz wrote: > > > When i try to boot the bootonly cd of FreeBSD 5.4-RC2 it hangs forever after > > > probing the isp(4) card. > > > > > > >>>show conf > > > > > > > > > Bus 00 Slot 20: DECchip 21152 PCI to PCI Bridge > > > Bus 01 Slot 04: ISP1040 Scsi Controller > > > pkc0.7.0.1004.0 SCSI Bus ID 7 > > > dkc0.0.0.1004.0 RZ2CC-KB > > > dkc100.1.0.1004.0 SEAGATE ST39175LW > > > > Put the isp card into a 64 bit slot. > > Miata GL has onboard isp(4) SCSI. Miata MX5 does not. Ah - mixed those up. > That said, any relation that you can think of with interrupt routing? No - there is a problem on MX5, but in this case the bridge setup looks correct. If there are problems with int routing then they should be limited to add-on hardware, not standard. All I know about is that there are problems with the cypress controller, which very likely still exists. > > Would be interesting to see what happens with your IDE controller. > > Yup... Are there any other models with Cypress chips? I think most in that time range had CMD646 ones. -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050412212717.GF40828>