Date: Fri, 13 May 2005 18:58:24 +0200 From: Paolo Pisati <p.pisati@oltrelinux.com> To: FreeBSD_Bluetooth <freebsd-bluetooth@freebsd.org> Subject: Dell True Mobile 350 Message-ID: <20050513165824.GA791@tin.it>
next in thread | raw e-mail | index | archive | help
hi guys, i just got a brand new Dell Inspiron 6000 with a Dell Truemobile 350 card. This is my verbose dmesg: FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a5a000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0a5a2e4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0a5a390. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a5a43c. Calibrating clock(s) ... i8254 clock: 1193189 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1596012945 Hz CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory = 528297984 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001eec6fff, 506077184 bytes (123554 pages) avail memory = 507289600 (483 MB) Table 'FACP' at 0x1f7d4c00 Table 'APIC' at 0x1f7d5400 MADT: Found table at 0x1f7d5400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled ACPI APIC Table: <DELL CPi R > bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbaae pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high MADT: Ignoring local NMI routed to ACPI CPU 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000054 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fb7c0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 3 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 3 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 3 1 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 3 1 C 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 3 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 3 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/2 1/1 1/1 1/1 1/1 1/2 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (4 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x10e0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base dff00000, size 19, enabled map[14]: type 4, range 32, base 0000ec38, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base dfec0000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2592, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dff80000, size 19, enabled found-> vendor=0x8086, dev=0x2792, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[20]: type 4, range 32, base 0000bf60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x265b, revid=0x03 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=19 map[10]: type 1, range 32, base ffa80800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000ed00, size 8, enabled map[14]: type 4, range 32, base 0000ec40, size 6, enabled map[18]: type 1, range 32, base dfebfe00, size 9, enabled map[1c]: type 1, range 32, base dfebfd00, size 8, enabled pcib0: matched entry for 0.30.INTA pcib0: slot 30 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x266e, revid=0x03 bus=0, slot=30, func=2 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ee00, size 8, enabled map[14]: type 4, range 32, base 0000ec80, size 7, enabled pcib0: matched entry for 0.30.INTB pcib0: slot 30 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x266d, revid=0x03 bus=0, slot=30, func=3 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bfa0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2653, revid=0x03 bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 000010c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x266a, revid=0x03 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf60 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 3 pcib1: subordinate bus 4 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdfd00000-0xdfdfffff pcib1: prefetched decode 0xfff00000-0xfffff pcib1: Subtractively decoded bridge. ACPI PCI link initial configuration: pci3: <ACPI PCI bus> on pcib1 pci3: physical bus=3 map[10]: type 1, range 32, base dfdfe000, size 13, enabled pcib1: device (null) requested decoded memory range 0xdfdfe000-0xdfdfffff pcib1: matched entry for 3.0.INTA pcib1: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x14e4, dev=0x170c, revid=0x02 bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1180, dev=0x0476, revid=0xb3 bus=3, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfdfc800, size 11, enabled pcib1: device (null) requested decoded memory range 0xdfdfc800-0xdfdfcfff pcib1: matched entry for 3.1.INTB pcib1: slot 1 INTB hardwired to IRQ 18 found-> vendor=0x1180, dev=0x0552, revid=0x08 bus=3, slot=1, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfdfc700, size 8, enabled pcib1: device (null) requested decoded memory range 0xdfdfc700-0xdfdfc7ff pcib1: matched entry for 3.1.INTC pcib1: slot 1 INTC hardwired to IRQ 17 found-> vendor=0x1180, dev=0x0822, revid=0x17 bus=3, slot=1, func=2 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfdfd000, size 12, enabled pcib1: device (null) requested decoded memory range 0xdfdfd000-0xdfdfdfff pcib1: matched entry for 3.3.INTA pcib1: slot 3 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=3, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfdfe000-0xdfdfffff irq 18 at device 0.0 on pci3 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xdfdfe000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:11:43:7b:32:d4 bfe0: [GIANT-LOCKED] cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci3 pcib1: device cbb0 requested decoded memory range 0xdfd00000-0xdfdfffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xdfd00000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 3.1.INTA pcib1: slot 1 INTA hardwired to IRQ 19 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700b3 0x00824000 0x10: 0xdfd00000 0x020000dc 0x20040403 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400113 0x40: 0x01881028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x00000008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0xb2000000 0x00003000 0x00000000 0xc0: 0x01881028 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: <Ricoh R5C552> mem 0xdfdfc800-0xdfdfcfff irq 18 at device 1.1 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdfdfc800 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 4a:4f:c0:00:1b:9d:4c:30 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 4a:4f:c0:9d:4c:30 fwe0: bpf attached fwe0: Ethernet address: 4a:4f:c0:9d:4c:30 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci3: <base peripheral> at device 1.2 (no driver attached) pci3: <network> at device 3.0 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0xec40-0xec7f,0xed00-0xedff mem 0xdfebfd00-0xdfebfdff,0xdfebfe00-0xdfebffff irq 16 at device 30.2 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xdfebfe00 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xdfebfd00 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9752/53 AC97 Codec (id = 0x83847652)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 5 pcm0: sndbuf_setmap 1ea18000, 4000; 0xd520a000 -> 1ea18000 pcm0: sndbuf_setmap 1ea10000, 4000; 0xd520e000 -> 1ea10000 pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 17 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xc0000-0xce7ff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x8201 0x8201 0x8201 0x8201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x8201 0x8201 0x8201 0x8201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: Dell product 0x8103, rev 2.00/16.57, addr 2 umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2 umass0: Get Max Lun not supported (STALLED) umass0:1:0:-1: Attached to scbus1 ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 1596012945 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: <FUJITSU MHT2040AH/006C> ATA-6 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: <PHILIPS CD-RW/DVD-ROM CDD5263/UD91> CDRW drive at ata1 as master acd0: read 689KB/s (4126KB/s) write 4126KB/s (4126KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 47998 Hz, will use 48000 Hz [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:58717512 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 30063366144 end 30063398399 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 1030324224 end 1298759679 GEOM: Configure ad0s1c, start 0 length 30063366144 end 30063366143 GEOM: Configure ad0s1d, start 1298759680 length 268435456 end 1567195135 GEOM: Configure ad0s1e, start 1567195136 length 268435456 end 1835630591 GEOM: Configure ad0s1f, start 1835630592 length 28227735552 end 30063366143 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <HDS72251 6VLAT20 \\0000\\0000> Fixed Direct Access SCSI-0 device pass0: 1.000MB/s transfers GEOM: new disk da0 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <HDS72251 6VLAT20 \\0000\\0000> Fixed Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 157066MB (321672960 512 byte sectors: 255H 63S/T 20023C) [0] f:00 typ:6 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:160826652 [1] f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:160826715 l:160842780 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 82343245824 end 82343278079 GEOM: Configure da0s2, start 82343278080 length 82351503360 end 164694781439 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered WARNING: driver "vmmon" used unreserved major device number 200 vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $ vmmon: Module vmmon: initialized vmnet1: bpf attached vmnet1: Ethernet address: 00:bd:28:09:00:01 vmnet1: promiscuous mode enabled as you can see there's this: ugen0: Dell product 0x8103, rev 2.00/16.57, addr 2 and i thought it's my bluetooth device so i added product DELL TRUEMOBILE350 0x8103 TrueMobile 350 (Bluetooth) recompiled & installed a new kernel and the next boot i got: ugen0: Dell TrueMobile 350 (Bluetooth), rev 2.00/16.57, addr 2 but even if i load ng_ubt i don't get any device in /dev. [flag@longino ~]$ kldstat | grep ubt 15 1 0xc222d000 b000 ng_ubt.ko [flag@longino ~]$ ls /dev/*ubt* ls: /dev/*ubt*: No such file or directory [flag@longino ~]$ any ideas? i know linux support it.. -- Paolo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050513165824.GA791>