Date: Mon, 12 Dec 2005 17:04:46 +0300 From: Gleb Smirnoff <glebius@FreeBSD.org> To: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> Cc: freebsd-stable@FreeBSD.org Subject: Re: puc fails to attach serial ports Message-ID: <20051212140446.GQ37414@FreeBSD.org> In-Reply-To: <20051211181324.G71610@ury.york.ac.uk> References: <20051211181324.G71610@ury.york.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Dec 11, 2005 at 06:22:40PM +0000, Gavin Atkinson wrote: G> I'm trying to use puc(4) under RELENG_6 to attach the two serial ports on G> a PCI card I have, but it's not working. It also fails under 6.0-RELEASE, G> I don't have the ability to test earlier versions. G> G> The card is developed, but as far as I can see, no attempt is made to G> attach the sio(4) devices below it. G> G> puc0: <Dolphin Peripherals 4036> port 0x18c0-0x18df irq 25 at device 9.0 on G> pci0 G> puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x18c0 G> port rid 16 bst 0, start 18c0, end 18df G> puc0: i 0, type sio, ressz 8, type 1 G> puc: Using sio2 G> puc: type 1, bar 10, offset 0 G> puc0: i 1, type sio, ressz 8, type 1 G> puc: Using sio3 G> puc: type 1, bar 10, offset 8 G> G> Adding some printfs to the code, it turns out that device_probe_and_attach G> around line 375 of sys/dev/puc/puc.c is returning 6. G> G> I have also added printfs to the probe and attach code of both the pci and G> puc attachments of sio(4), and have determined that none of them get G> called. G> G> How can I further diagnose why this card is not getting recognised? Afaik, you need 'device uart', that will attach to your pucs. -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051212140446.GQ37414>