Date: Thu, 2 Feb 2006 06:20:34 -0800 (PST) From: RA Cohen <roy2098@yahoo.com> To: freebsd-questions@freebsd.org Cc: illoai@gmail.com Subject: Re: Compaq Integrated SmartArray Quantum DLT4000 Message-ID: <20060202142034.72674.qmail@web31613.mail.mud.yahoo.com> In-Reply-To: <d7195cff0602012048t6cc928fdg288793917f806eff@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I was physically at the machine yesterday with the SmartStart CD in hand, but as I was about to boot off that CD thought it would be only useful for setting up drive arrays...not the tape drive. So I didn't pursue it. I'll have to check it out later today... I'll let you and the maillist know, Roy --- "illoai@gmail.com" <illoai@gmail.com> wrote: > On 2/1/06, RA Cohen <roy2098@yahoo.com> wrote: > > Hi All, > > > > I'm running several Compaq Proliant DL360 servers, all with > FBSD > > 6.0-RELEASE. > > > > One of these has an internal Quantum DLT 4000 (that's how > the > > BIOS identifies it) tape drive. I need to use it, but can > find > > no evidence of this hardware in the dmesg output. > . . . > > The system sees the integrated controller and uses ida0 to > id > > it, but does not see the tape drive. > > > > If it's anything like my old proliant, the tape drive > is on ncr0 or ncr1 (or sym[01] any of which are the > on-board scsi controllers), which do not appear to probe > on your system. If your tape drive is cabled to > ida0 or ida1, you'll probably need to resort to the > array controller firmware or CD, depending, and > set it up from there. > > > -- > -- > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060202142034.72674.qmail>