Date: Sun, 12 Feb 2006 12:47:58 +0300 From: Gleb Smirnoff <glebius@FreeBSD.org> To: freebsd-usb@FreeBSD.org Subject: Nokia CA-42 cable Message-ID: <20060212094758.GP86448@cell.sick.ru>
next in thread | raw e-mail | index | archive | help
Colleagues, recently I have purchased a Nokia CA-42 cable, that is used to connect cellular phone. It has the following IDs: vendor 0x0421 product 0x0802 I've looked for this IDs in NetBSD and Linux and failed to find them there. In Linux there are IDs for CA-42 cable, but they are different. However, I've found[1] that this cable is working in Linux if IDs are overriden: modprobe usbserial vendor=0x0421 product=0x0802 So I have tried to do same in FreeBSD (patch attached) but failed. Here goes debug data when I plug cable in: usbd_new_device bus=0xc1eee000 port=1 depth=1 speed=2 usbd_new_device: adding unit addr=2, rev=110, class=2, subclass=0, protocol=0, maxpacket=8, len=18, speed=2 usbd_new_device: new dev (addr 2), dev=0xc23b8100, parent=0xc1ef2000 usbd_probe_and_attach: trying device specific drivers ucom0: <vendor 0x0421 product 0x0802, class 2/0, rev 1.10/1.00, addr 2> on uhub0 ucom0: vendor 0x0421 product 0x0802, rev 1.10/1.00, addr 2 uplcom attach: sc = 0xc2069800 uplcom_attach: chiptype 2303 usbd_set_config_index: (addr 1) cno=2 attr=0xa0, selfpowered=0, power=150 usbd_set_config_index: set config 1 usbd_do_request: status = 0x0000 ucom0: uplcom_reset: STALLED ucom0: reset failed: NOMEM device_attach: ucom0 attach returned 6 usbd_probe_and_attach: no device specific driver found usbd_probe_and_attach: looping over 1 configurations usbd_set_config_index: free old config usbd_set_config_index: (addr 1) cno=2 attr=0xa0, selfpowered=0, power=150 usbd_set_config_index: set config 1 usbd_probe_and_attach: no interface drivers found ucom0: <vendor 0x0421 product 0x0802, class 2/0, rev 1.10/1.00, addr 2> on uhub0 ucom0: vendor 0x0421 product 0x0802, rev 1.10/1.00, addr 2 uplcom attach: sc = 0xc239b900 uplcom_attach: chiptype 2303 usbd_set_config_index: free old config usbd_set_config_index: (addr 1) cno=2 attr=0xa0, selfpowered=0, power=150 usbd_set_config_index: set config 1 usbd_do_request: status = 0x0000 ucom0: uplcom_reset: STALLED ucom0: reset failed: NOMEM device_attach: ucom0 attach returned 6 usbd_probe_and_attach: generic attach failed I'm lame in USB and I can't understand why Linux supports this device w/o any additional modifications, just recognising ID, but our driver doesn't. I'm seeking for advice, that will help me get this device working. [1] http://linux.seindal.dk/item97.html http://www.qbik.ch/usb/devices/showdev.php?id=3251 -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060212094758.GP86448>