Date: Wed, 27 Sep 2006 14:25:12 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: YAMAMOTO Shigeru <shigeru@iij.ad.jp> Cc: freebsd-current@FreeBSD.org Subject: Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers. Message-ID: <20060927052512.GG5975@cdnetworks.co.kr> In-Reply-To: <20060927.141621.78040393.shigeru@iij.ad.jp> References: <20060926002916.GA5975@cdnetworks.co.kr> <20060926.210009.34729196.shigeru@iij.ad.jp> <20060926121707.GC5975@cdnetworks.co.kr> <20060927.141621.78040393.shigeru@iij.ad.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Sep 27, 2006 at 02:16:21PM +0900, YAMAMOTO Shigeru wrote: > > >>>>> "Pyun" == Pyun YongHyeon <pyunyh@gmail.com> writes: > >> 'MSK_JSLTS' is not defined in this patch. > >> > >> Thanks, > Pyun> Oops! It should be fixed now. Please try again. > > I get new patch and try again. > I test "Marvell 88E8053" on amd64. > It work fine. > > Thanks, > > bash-2.05b# uname -a > FreeBSD venus.iij.ad.jp 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Wed Sep 27 12:40:16 JST 2006 root@venus.iij.ad.jp:/usr/src/sys/amd64/compile/VENUS amd64 > bash-2.05b# pciconf -l -v pci2:0:0 > ... > mskc0@pci2:0:0: class=0x020000 card=0x81421043 chip=0x436211ab rev=0x15 hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = '88E8053 Yukon PCI-E Gigabit Ethernet Controller (copper)' > class = network > subclass = ethernet > > bash-2.05b# ifconfig msk0 > msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> > inet6 fe80::213:d4ff:fefa:428a%msk0 prefixlen 64 scopeid 0x5 > ether 00:13:d4:fa:42:8a > media: Ethernet autoselect (100baseTX <full-duplex,flag0,flag1>) > status: active > Thanks a lot. Would you let me know what PHY driver was attached to your NIC? If ukphy(4) was used for the NIC I'd like to know PHY model number. -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060927052512.GG5975>