Date: Sun, 01 Apr 2007 22:03:08 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-multimedia@freebsd.org Subject: Re: FreeBSD-6.2 ; Hauppage PVR-350 ; "pvrxxx" port - not working. Message-ID: <20070401220308.61598af5.torfinn.ingolfsen@broadpark.no> In-Reply-To: <BAY134-F3122ED8C1741CBCEA63987A1610@phx.gbl> References: <20070401184413.d9cb6faf.torfinn.ingolfsen@broadpark.no> <BAY134-F3122ED8C1741CBCEA63987A1610@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 01 Apr 2007 19:08:48 +0000 Rick Nekus <solarux@hotmail.com> wrote: > I did portscan fetch;portscan extract; portscan update > that should do it right ?, or is there a special "usleepless" update If you mean "portsnap" here, yes, thayt should do it. > available? > umm, trying to make sense of other threads here, does this mean > install FreeBSD 5.3 ? (is that the alternative for now?), ... No, by all means. I know it is April Fools' Day, but therer is no need to go backwards. :-) FreeBSD 6.2 will be fine. > uhh ok, well thats' a small letdown, should I use the pvr250 ( they I should rephrase that; the pvrxxx port doesn't work with the pvr-350 in *my* machine right now. This might be caused by other things than the port itself, which I haven't ruled out yet (a bad cable, for example). > both look the same to me pvr250/xxx ?) or maybe (on a dry-humour note) The pvr250 and the pvrxxx port might look the same, but the last time I checked, the pvr250 port was missing some needed ioctl's that MythTV required. This is some months ago, so things might have changed. Or not, I haven't checked. You could try the pvr250 port; if it works - good. > it sounds close to me ?, am I reading this wrong, but how did you get Yes, I guess our cards are equal, perhaps except for the tuner. > "yours'" working (or did you?) being you have the same cx23415 chip I got mine working, or actually, usleep got mine working while testing the pvrxxx driver. Right now, the canle signal is down, so I can only watch recordings, not test drivers. > (PVR-350) set I have -or is this a tuner specific fullfilment that is > not supported? I don't think the tuner is shown in the pciconf / lspci output, I think you will have to load a driver for that. Here is what the pvrxxx driver says about my card (from dmesg): cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at device 0.0 on pci2 cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 iicbb0: <I2C bit-banging driver> on cxm_iic0 iicbus0: <Philips I2C bus> on iicbb0 master-only cxm0: Philips FM1216ME MK3 tuner cxm0: SAA7115 rev 1 video decoder cxm0: MSP4418G-B3 audio decoder cxm0: IR Remote cxm0: [FAST] cxm0: encoder firmware version 0x2060039 cxm0: decoder firmware version 0x2020023 This is with driver: root@kg-quiet# pv | grep pvr pvrxxx-20060822 = up-to-date with port (possibly modified) on a machine running: root@kg-quiet# uname -a FreeBSD kg-quiet.kg4.no 6.2-STABLE FreeBSD 6.2-STABLE #15: Thu Jan 25 21:44:50 CET 2007 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET amd64 HTH PS. You don't have to CC me, I am subscribed to the freebsd-mobile list. -- Regards, Torfinn Ingolfsen, Norway
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070401220308.61598af5.torfinn.ingolfsen>