Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Apr 2007 01:20:01 +0900
From:      Norikatsu Shigemura <nork@FreeBSD.org>
To:        current@FreeBSD.org
Subject:   linux sg panic on 7-current
Message-ID:  <20070409012001.adeb61b8.nork@FreeBSD.org>

next in thread | raw e-mail | index | archive | help
	I have a new issue of linux sg, new cam feature.  So I kgdb-ed,
	but I have no idea to fix this issue.  Please see also following
	result.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0xc
fault code              = supervisor write, page not present
instruction pointer     = 0x20:0xc09589bb
stack pointer           = 0x28:0xfc795b60
frame pointer           = 0x28:0xfc795b98
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 1333 (hald-probe-storage)
[thread pid 1333 tid 100163 ]
Stopped at      sgread+0xab:    movl    $0x1,0xc(%ebx)
db> bt
Tracing pid 1333 tid 100163 td 0xc5b27cb0
sgread(c53a2f00,fc795c60,0,c6b85048,fc795c60,...) at sgread+0xab
giant_read(c53a2f00,fc795c60,0,c00,c53a2f00,...) at giant_read+0x6a
devfs_read_f(c6b85048,fc795c60,c4d37080,0,c5b27cb0,...) at devfs_read_f+0x7c
dofileread(c5b27cb0,4,c6b85048,fc795c60,ffffffff,...) at dofileread+0xa7
kern_readv(c5b27cb0,4,fc795c60,4112a00c,bf4,...) at kern_readv+0x60
read(c5b27cb0,fc795d00,c,6,c,...) at read+0x4f
syscall(fc795d38) at syscall+0x363
Xint0x80_syscall() at Xint0x80_syscall+0x20
--- syscall (3, FreeBSD ELF32, read), eip = 0x404922d7, esp = 0xbfbfe64c, ebp = 0xbfbfe6b8 ---
db> call doadump
Physical memory: 2039 MB
Dumping 96 MB: 81 65 49 33 17 1
Dump complete
= 0xf
db> reset 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
# cd /usr/obj/usr/src/sys/NADESICO 
# kgdb -n 2
[GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol "ps_pglobal_lookup"]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-marcel-freebsd".
Ready to go.  Enter 'tr' to connect to the remote target
with /dev/cuad0, 'tr /dev/cuad1' to connect to a different port
or 'trf portno' to connect to the remote target with the firewire
interface.  portno defaults to 5556.

Type 'getsyms' after connection to load kld symbols.

If you're debugging a local system, you can use 'kldsyms' instead
to load the kld symbols.  That's a less obnoxious interface.
During symbol reading, debug info gives macro definition outside of any file: __STDC_VERSION__ 199901L.
During symbol reading, no terminating 0-type entry for macros in `.debug_macinfo' section.
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.

Unread portion of the kernel message buffer:


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0xc
fault code              = supervisor write, page not present
instruction pointer     = 0x20:0xc09589bb
stack pointer           = 0x28:0xfc795b60
frame pointer           = 0x28:0xfc795b98
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 1333 (hald-probe-storage)
Physical memory: 2039 MB
Dumping 96 MB: 81 65 49 33 17 1

#0  doadump () at pcpu.h:172
172             __asm __volatile("movl %%fs:0,%0" : "=r" (td));
(kgdb) getsyms
During symbol reading, Incomplete CFI data; unspecified registers at 0xc04a66a3.
Id Refs Address    Size     Name
 1   52 0xc0400000 3c1e5c   kernel
 2    1 0xc07c2000 44ec     nullfs.ko
 3    1 0xc07c7000 61fc     geom_label.ko
 4    1 0xc07ce000 6f44     geom_md.ko
 5    2 0xc07d5000 27440    linux.ko
 6    3 0xc07fd000 4914     sysvmsg.ko
 7    3 0xc0802000 6384     sysvsem.ko
 8    2 0xc0809000 4b84     sysvshm.ko
 9    1 0xc080e000 5844     if_tap.ko
10    1 0xc0814000 b504     snd_maestro3.ko
11    2 0xc0820000 42274    sound.ko
12    2 0xc0863000 245d0    usb.ko
13    1 0xc0888000 400c     ums.ko
14    1 0xc088d000 1799c    agp.ko
15    1 0xc08a5000 c2e4     random.ko
16    6 0xc08b2000 e90c     ata.ko
17    1 0xc08c1000 22960    atapci.ko
18    1 0xc08e4000 3bb0     atadisk.ko
19    1 0xc08e8000 7ef4     atapicd.ko
20    1 0xc08f0000 3b94     atapifd.ko
21    1 0xc08f4000 4cc8     atapist.ko
22    1 0xc08f9000 1d30     io.ko
23    1 0xc08fb000 4d60     mem.ko
24    1 0xc0900000 4584     if_fwe.ko
25    4 0xc0905000 15b6c    firewire.ko
26    1 0xc091b000 11674    sym.ko
27    3 0xc092d000 4150c    cam.ko
28    1 0xc096f000 a678     sbp.ko
29    1 0xc097a000 2df0     dcons_crom.ko
30    1 0xc097d000 a9c4     hifn.ko
31    1 0xc0988000 68640    acpi.ko
32    2 0xc573c000 6000     procfs.ko
33    2 0xc5747000 6000     pseudofs.ko
34    1 0xc57a2000 7000     linprocfs.ko
35    1 0xc57b2000 a5000    zfs.ko
36    1 0xc6876000 36000    nfsclient.ko
37    1 0xc69ee000 1f000    nfsserver.ko
38    1 0xc6b33000 8000     aio.ko
39    1 0xc6b46000 1d000    kqemu.ko
Select the list above with the mouse, paste into the screen
and then press ^D.  Yes, this is annoying.
 1   52 0xc0400000 3c1e5c   kernel
 2    1 0xc07c2000 44ec     nullfs.ko
 3    1 0xc07c7000 61fc     geom_label.ko
 4    1 0xc07ce000 6f44     geom_md.ko
 5    2 0xc07d5000 27440    linux.ko
 6    3 0xc07fd000 4914     sysvmsg.ko
 7    3 0xc0802000 6384     sysvsem.ko
 8    2 0xc0809000 4b84     sysvshm.ko
 9    1 0xc080e000 5844     if_tap.ko
10    1 0xc0814000 b504     snd_maestro3.ko
11    2 0xc0820000 42274    sound.ko
12    2 0xc0863000 245d0    usb.ko
13    1 0xc0888000 400c     ums.ko
14    1 0xc088d000 1799c    agp.ko
15    1 0xc08a5000 c2e4     random.ko
16    6 0xc08b2000 e90c     ata.ko
17    1 0xc08c1000 22960    atapci.ko
18    1 0xc08e4000 3bb0     atadisk.ko
19    1 0xc08e8000 7ef4     atapicd.ko
20    1 0xc08f0000 3b94     atapifd.ko
21    1 0xc08f4000 4cc8     atapist.ko
22    1 0xc08f9000 1d30     io.ko
23    1 0xc08fb000 4d60     mem.ko
24    1 0xc0900000 4584     if_fwe.ko
25    4 0xc0905000 15b6c    firewire.ko
26    1 0xc091b000 11674    sym.ko
27    3 0xc092d000 4150c    cam.ko
28    1 0xc096f000 a678     sbp.ko
29    1 0xc097a000 2df0     dcons_crom.ko
30    1 0xc097d000 a9c4     hifn.ko
31    1 0xc0988000 68640    acpi.ko
32    2 0xc573c000 6000     procfs.ko
33    2 0xc5747000 6000     pseudofs.ko
34    1 0xc57a2000 7000     linprocfs.ko
35    1 0xc57b2000 a5000    zfs.ko
36    1 0xc6876000 36000    nfsclient.ko
37    1 0xc69ee000 1f000    nfsserver.ko
38    1 0xc6b33000 8000     aio.ko
39    1 0xc6b46000 1d000    kqemu.ko
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/acpi/acpi/acpi.ko.debug" at
        .text_addr = 0xc0999800
        .data_addr = 0xc09da220
        .bss_addr = 0xc09dca00
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/agp/agp.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0892840
        .data_addr = 0xc08a0260
        .bss_addr = 0xc08a0f78
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/aio/aio.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc6b359d0
        .data_addr = 0xc6b3a000
        .bss_addr = 0xc6b3aa40
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/ata/ata.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08b6160
        .data_addr = 0xc08beb60
        .bss_addr = 0xc08beed8
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/atapci/atapci.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08c8ea0
        .data_addr = 0xc08df000
        .bss_addr = 0xc08e09b4
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/atadisk/atadisk.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08e4f90
        .data_addr = 0xc08e6da0
        .bss_addr = 0xc08e6f58
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/atapicd/atapicd.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08e9cb0
        .data_addr = 0xc08eede0
        .bss_addr = 0xc08eefe8
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/atapifd/atapifd.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08f0f10
        .data_addr = 0xc08f2da0
        .bss_addr = 0xc08f2f58
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ata/atapist/atapist.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08f5330
        .data_addr = 0xc08f7cc0
        .bss_addr = 0xc08f7ee8
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/cam/cam.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0939d00
        .data_addr = 0xc0964120
        .bss_addr = 0xc0967440
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/dcons_crom/dcons_crom.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc097ab80
        .data_addr = 0xc097c100
        .bss_addr = 0xc097c278
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/firewire/firewire/firewire.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0908a00
        .data_addr = 0xc0917000
        .bss_addr = 0xc0917d10
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/firewire/fwe/if_fwe.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0901130
        .data_addr = 0xc09030c0
        .bss_addr = 0xc0903408
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/firewire/sbp/sbp.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc09717b0
        .data_addr = 0xc0977000
        .bss_addr = 0xc09775bc
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/geom/geom_label/geom_label.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc07c8b10
        .data_addr = 0xc07cc340
        .bss_addr = 0xc07cc510
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/hifn/hifn.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc097f560
        .data_addr = 0xc09862a0
        .bss_addr = 0xc0986560
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/if_tap/if_tap.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc080fc10
        .data_addr = 0xc0812000
        .bss_addr = 0xc0812428
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/io/io.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08f95f0
        .data_addr = 0xc08fa740
        .bss_addr = 0xc08fa868
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/linprocfs/linprocfs.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc57a4610
        .data_addr = 0xc57a8ca0
        .bss_addr = 0xc57a8f44
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/linux/linux.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc07dddb0
        .data_addr = 0xc07f3000
        .bss_addr = 0xc07f577c
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/md/geom_md.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc07cfdc0
        .data_addr = 0xc07d3940
        .bss_addr = 0xc07d3be8
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/mem/mem.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08fbff0
        .data_addr = 0xc08feaa0
        .bss_addr = 0xc08fed50
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/nfsclient/nfsclient.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc68806d0
        .data_addr = 0xc68a9760
        .bss_addr = 0xc68aadc0
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/nfsserver/nfsserver.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc69f2be0
        .data_addr = 0xc6a07140
        .bss_addr = 0xc6a07740
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/nullfs/nullfs.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc07c3420
        .data_addr = 0xc07c5000
        .bss_addr = 0xc07c5390
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/procfs/procfs.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc573dcb0
        .data_addr = 0xc5741500
        .bss_addr = 0xc574185c
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/pseudofs/pseudofs.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc5748be0
        .data_addr = 0xc574c740
        .bss_addr = 0xc574cb18
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/random/random.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08a6ee0
        .data_addr = 0xc08af000
        .bss_addr = 0xc08af280
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sound/sound/sound.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc082f000
        .data_addr = 0xc08501a0
        .bss_addr = 0xc0856640
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sound/driver/maestro3/snd_maestro3.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0815d80
        .data_addr = 0xc081d0a0
        .bss_addr = 0xc081df7c
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sym/sym.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc091cde0
        .data_addr = 0xc0929000
        .bss_addr = 0xc092af24
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sysvipc/sysvmsg/sysvmsg.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc07fe440
        .data_addr = 0xc0800000
        .bss_addr = 0xc0800588
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sysvipc/sysvsem/sysvsem.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc08037b0
        .data_addr = 0xc0806900
        .bss_addr = 0xc0806f24
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/sysvipc/sysvshm/sysvshm.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc080a4a0
        .data_addr = 0xc080c000
        .bss_addr = 0xc080c5cc
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/ums/ums.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0888f80
        .data_addr = 0xc088b360
        .bss_addr = 0xc088b508
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/usb/usb.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc0868670
        .data_addr = 0xc0880000
        .bss_addr = 0xc0880da0
add symbol table from file "/usr/obj/usr/src/sys/NADESICO/modules/usr/src/sys/modules/zfs/zfs.ko.debug" at
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
        .text_addr = 0xc57c57b0
        .data_addr = 0xc5849200
        .bss_addr = 0xc584b920
(kgdb) bt
#0  doadump () at pcpu.h:172
During symbol reading, Incomplete CFI data; unspecified registers at 0xc04a66a3.
During symbol reading, debug info gives macro definition outside of any file: __STDC_VERSION__ 199901L.
During symbol reading, no terminating 0-type entry for macros in `.debug_macinfo' section.
#1  0xc0435f3a in db_fncall (dummy1=0x0, dummy2=0x0, dummy3=0x7cf, dummy4=0xfc795904 "")
    at /usr/src/sys/ddb/db_command.c:486
#2  0xc0435ce0 in db_command (last_cmdp=0xc0707b04, cmd_table=0x0) at /usr/src/sys/ddb/db_command.c:401
#3  0xc0435dc5 in db_command_loop () at /usr/src/sys/ddb/db_command.c:453
#4  0xc0438055 in db_trap (type=0xc, code=0x0) at /usr/src/sys/ddb/db_main.c:222
#5  0xc04d045f in kdb_trap (type=0x0, code=0x0, tf=0xfc795b20) at /usr/src/sys/kern/subr_kdb.c:502
#6  0xc069462c in trap_fatal (frame=0xfc795b20, eva=0xc) at /usr/src/sys/i386/i386/trap.c:867
#7  0xc06942d5 in trap_pfault (frame=0xfc795b20, usermode=0x0, eva=0xc) at /usr/src/sys/i386/i386/trap.c:785
#8  0xc0693e4c in trap (frame=0xfc795b20) at /usr/src/sys/i386/i386/trap.c:462
#9  0xc067b54b in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#10 0xc09589bb in sgread (dev=0xc55c3c00, uio=0xfc795c60, ioflag=0x0)
    at /usr/src/sys/modules/cam/../../cam/scsi/scsi_sg.c:807
#11 0xc047171a in giant_read (dev=0xc53a2f00, uio=0xc55c3c00, ioflag=0xc55c3c00) at /usr/src/sys/kern/kern_conf.c:318
#12 0xc0457d3c in devfs_read_f (fp=0xc6b85048, uio=0xfc795c60, cred=0xc4d37080, flags=0x0, td=0xc5b27cb0)
    at /usr/src/sys/fs/devfs/devfs_vnops.c:873
#13 0xc04dd637 in dofileread (td=0xc5b27cb0, fd=0xc55c3c00, fp=0xc6b85048, auio=0xfc795c60, offset=Unhandled dwarf expression opcode 0x93
) at file.h:242
#14 0xc04dd430 in kern_readv (td=0xc5b27cb0, fd=0x4, auio=0xc55c3c00) at /usr/src/sys/kern/sys_generic.c:180
#15 0xc04dd2ef in read (td=0xc55c3c00, uap=0x0) at /usr/src/sys/kern/sys_generic.c:110
#16 0xc0694a73 in syscall (frame=0xfc795d38) at /usr/src/sys/i386/i386/trap.c:1016
#17 0xc067b5b0 in Xint0x80_syscall () at /usr/src/sys/i386/i386/exception.s:196
#18 0x00000033 in ?? ()
Previous frame inner to this frame (corrupt stack?)
(kgdb) list *sgread+0xab
During symbol reading, symtab found for `pcpu.h', but that file
is not covered in the compilation unit's macro information.
0xc09589bb is in sgread (/usr/src/sys/modules/cam/../../cam/scsi/scsi_sg.c:812).
807             TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
808                     if (rdwr->tag == pack_id)
809                             break;
810             }
811             if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
812                     rdwr->state = SG_RDWR_WAITING;
813                     if (tsleep(rdwr, PCATCH, "sgread", 0) == ERESTART)
814                             return (EAGAIN);
815                     goto search;
816             }
(kgdb) 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070409012001.adeb61b8.nork>